Guest CoolsBlue Posted January 17, 2008 Share Posted January 17, 2008 Hi all got a new speedo face for my supra with mph and km on it, what i want to know is, if i remove the speedo with the ingition of, take it in the house, remove the clear plastic cover, can i slide my new speedo face around and over the needle? (speedo face is pretty bendy) then re fit it, with the ingition of. Will this be ok to do?? Thanks!! Link to comment Share on other sites More sharing options...
Smellywelshman Posted January 17, 2008 Share Posted January 17, 2008 Thats what I did when I fitted my glo dials. No problem at all. Just make sure that you dont hit the fuel gauge needle, 'cos that one doesn't reset its self! Link to comment Share on other sites More sharing options...
supradibbs Posted January 17, 2008 Share Posted January 17, 2008 if the speeded is a decent one you will need to remove the needles this can be done by using two tea spoons oppoisite each other concaved up and apply small amount off pressure and they should pop right off Link to comment Share on other sites More sharing options...
Guest CoolsBlue Posted January 17, 2008 Share Posted January 17, 2008 Done it, easy peesy Link to comment Share on other sites More sharing options...
Gaz6002 Posted January 17, 2008 Share Posted January 17, 2008 Thats what I did when I fitted my glo dials. No problem at all. Just make sure that you dont hit the fuel gauge needle, 'cos that one doesn't reset its self! Do you'd advise doing this with a full tank then? My fuel gauge doesn't read correctly anyway, maybe this is why?? Link to comment Share on other sites More sharing options...
jacko Posted April 25, 2008 Share Posted April 25, 2008 Is it possible to reset the petrol needle? Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now