Steve

When travelling at speed the steering on my car is very light. It has been this way since i had it but it just seems so light. Could this be a crap Delimiter/converter? Which Thor unit is the recommended one to get?

Terminator Will try sending it again. Am using software 2.0.1(build 27) Thanks for looking Ian.

Whats your email mate?

Theres one on ebay nothing to do with me but here you go http://cgi.ebay.co.uk/1996-TOYOTA-SUPRA-TWIN-TURBO-UK_W0QQitemZ4568742929QQcategoryZ18290QQrdZ1QQcmdZViewItem

I may have edited my signature. Sorry dude

Can these be used to change the red lenses aswell as the indicators?

Obviously didnt look very hard Thanks James

Cheers for that. Will drop him a PM

Very good

Ian can i send you my dat file?

I can hook up the laptop yes. Just not sure what to do with it when connected. As i said to you Ian its as it came out the box apart from the wheel sizes programmed in.

*Cough*Dont know what you mean.?*cough* Well there is a vibration from the back end of the car and CW is hopefully gonna sort it, whether its the suspension or not i dont know. Just getting ideas.

Make an offer mate. He can only say no!!

Am looking at replacing the standard suspension on my car. Would like to lower it slightly aswell so it sits better on the 19's. What are the best ride quality springs & shocks to go for? Better for cornering would be a bonus too but dont want the ride too hard? Thanks

Cant find one, unless i am looking in the wrong place

As above like this one http://www.mkivsupra.net/vbb/showthread.php?t=42405

Mr Average - 108 - WORD WARRIOR Steve, your IQ score is in line with the national average. However, some of your skills are better developed than those of the average population. The classic IQ test analyses your strengths and weaknesses based on your mathematical, linguistic, visual-spatial and logical skills. By analysing your answers we can discover the areas in which you have the strongest abilities. You are equipped with a verbal arsenal that enables you to understand complex issues and communicate on a particularly high level. These talents make you a Word Warrior. Whether or not you recognise it, your vocabulary is your strongest suit -- use it whenever you can. Since your command of words is so great, you are also a terrific communicator -- able to articulate big ideas to just about anyone. Your wordsmithing prowess will also help in artistic and creative pursuits. The power of words translates to fresh ideas off paper too. Since you have so many words at your disposal, you are in a unique position to describe things in an original way, as well as see the future in your mind's eye. In short, your strengths allow you to be a visionary -- able to extrapolate and come up with a multitude of fresh ideas.

Yes mate as i said it holds approx 9.5 litres when empty i think. So you will probably need more. Keep us posted

When the car is cold. Remove the rad cap. Fill up to the top. Start car and put the heater on its hottest setting with the fan on full. I then found the easiest way to force the air out is to squeeze the two pipes at the rear off the engine that go to the heater matrix (careful though they will get hot). You should see air come out of the rad. Just keep topping with fluid as needed. After about ten minutes of this you should find the heater gets hot. Replace the rad cap, top up the expansion tank to the required level and enjoy. If you still get the bubbling noise after a drive you may need to replace the rad cap as it is probably knackered. Think the system holds about 9.5 litres of fluid. best to use Toyota Forlife (red stuff) Hope this helps

Sounds like trapped air in the system, try bleeding it again Have you tried replacing the rad cap. They do start bubbling when they are knackered.

Hope its not a repost http://media.putfile.com/Pepsi_Girl

Glad to help someone for a change . Usually the other way around Glad its sorted col

Have recently had RLTC fitted by Matt H. (cheers mate). Works great. But the other day was in the wet (set RLTC to wet) put my pulled away from a junction and the back end stepped out big style. Can this be adjusted to stop this happening? If so how???

Did it work?