Jump to content
The mkiv Supra Owners Club

Supra ST Myster

Followers
  • Posts

    2214
  • Joined

Everything posted by Supra ST Myster

  1. Few pics showing the difference between the 2 rear lights, again hard to take pics at night but pretty good how they have come out.
  2. Paul E x 2 paul_y3k CJ Millhouse (pending work) Gatso Dude keron Attilauk Mark Kindell Donna bigmoistyturbo+1 Ashley Willis+1 Timwildman +1 leett+1 Tlicense+1 Ray (Cunliffe) Supra TT Myster + 1
  3. no i have done all 4 on each side, which consists of 4 outer circles for the tails, then a inner circle for the brakes and then on the right the 2 inners are indicators and the far left inner is the reverse.
  4. I will take a few pics tonight of the difference between the two rear lights on my supra, hopefully they will come out clearly to see the difference. They just plug into the origanal loom.
  5. and with brakes on, which are brighter than the tails. they will have a relay in them to switch the inner 2 brake lights to fogs when needed.
  6. Just a couple of sneaky pics of some led rear lights im working on, thoughts on them please. only two shots at the moment and they look a lot better in the flesh but hard to take a pic of bright lights at night. Will post some more pics of one fitted to my car possibly tomorrow.
  7. excellent, thanks a lot for that.
  8. any spec is fine, suppose if ordering from toyota a uk spec one please.
  9. Does anyone know the part numbers for the rear light looms left and right and aslo how much they are? and a picture of it if posible?
  10. Think there is a fuse inline for the power for the ECU, but not sure where it is, if you are getting 9V out on the blue/red wire that should be going to the pump.
  11. Is there 12V going to the Fuel Pump ECU and 9V comming out of it?? 12V should be on the blue/orange wire or solid blue depending of year of car when ignition is on and 9V approx on the blue/red wire?
  12. so what did you do in the end, did you fit that manual boost valve that you showed in the pic?
  13. again belive it goes in the same place, that one that you posted a pic of has a ball bearing in it with a small hole at the top so the tighter you screw it in the harder it is to push the ball bearing pass the hole to bleed it off.
  14. this pic shows you which pipe it is. Hose 2, the other pipe goes to a manual boost controller inside the car so you dont need that, just goes in between hose 2.
  15. should be able to just hang around, as shouldnt take too long (so he says) didnt you say that before it happened that your dash was taken apart? I am in High Wycombe, Wednesday afternoon is fine, say around 2pm onwards as i have to be somewhere in the morning but be back by 2 onwards. Let me know if this is ok and i will pm you my address.
  16. if you can come over to me i dont mind taking a look at it tomorrow, or i can meet you at southmims on m25 junct 23 tomorrow around 11-11.30 as i will be passing there as heading back down the A1.
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. You might also be interested in our Guidelines, Privacy Policy and Terms of Use.