Nepalm

I am thinking of going for a manual so trying to raise some funds

removes the boost speed delimiter, runs a more advanced map good for bpu looking for £250 but willing to take offers. can deliver within 10 miles of Kingston or can post for a small fee http://img809.imageshack.us/img809/4614/img03291.th.jpg http://img696.imageshack.us/img696/9540/img03311.th.jpg http://img146.imageshack.us/img146/8417/img03321.th.jpg

1. scottc998 2. Fitz 3. Abz 4. Nepalm 5. 6.

Yea got an alpine too it goes up when the unit is turned on irrespective of what you selected

Ok cheers guys i will send it back as faulty then seems to be the general response thx for all the help

You might be right think i will have to send it back and yes the old ecu works fine. no fault code at all there is no engine light that comes on

no pins missing

I have mate the old one is back in and working

mate it floods the car in about 1 min and won't start again + it was pouring out black smoke

http://www.mkivsupra.net/vbb/showthread.php?t=192708 it's only supposed to be doing these as it's not remappable

Guys i just got a SARD Ecu A/T for my supra matched all the numbers and it was correct to my stock one but when i put it in my car i just get black smoke erratic idle ,floods the engine and cut off. Try starting it up and the it's just flooded all i can smell inside and outside is petrol. After a while starts up and keep misfiring dies but as soon i stick the stock Ecu back in it's all working again without any probs ?? I do have a HKS boost-cut which i set to 12 as that will let through the signal and my car is a TT A/T Bpu anyone can help with this prob??

i had the same prob with my celica gt4 but when i remove the hose to check the turbo there was no oil so i wouldn't worry

bump

send me your details i will take them delivery will be for mainland uk