babou88

hello! you have a PM!

pm sent sorry for off topic pay too play!

if it's a facelift , interested in the clock (analogue), if you have ....

Hi! still searching for a functionnal Analogue clock (facelift one) and an OEM airbox for VVti twin turbo please Best regards

i don't know because i have bought it used, but have searched on the web and it seems that sumopower sell it: http://www.driftworks.com/forum/technical/157582-speedo-converter-ck-un-09-a.html or you can find it new here too: http://www.ebay.co.uk/itm/Speedo-speedometer-converter-chip-E-SVA-IVA-KMH-to-MPH-CARTEK-CK-UN-09-/381390870446 best regards bastien

Hello, For information, if i can help someone if needed , after testing by myself : the grey wire on my speedo need to be connected to the pink one, on the loom side of course. best regards Bastien

Bump! nobody install speedo converter on a UK forum ?? can't pass my MOT or drive the car without a functionnal speedometer. have read this of course : http://www.mkivsupra.net/vbb/showthread.php?112141-How-To-Install-a-Speedo-Convertor-and-Delimiter but schématic doesn't work ... thanks Bastien

Hello, Sorry to recover such an old post, but I have the (almost) same speedo converter to fit : and it's ok for the Blue, Red and Green wires : and ok for the yellow one too ! (on the Blue/Red wire from the loom behind dash) but i can't find a pink/grey one to link on the grey of my speedo converter... i have just a pink one, or a red/grey one ... can someone help me for where does i need to link the grey one? my car is a 1998 vvti turbo jdm manual. thanks best regards bastien

paypal done, with my adress in instructions best regards Bastien

Hello; I've tried to contact heckler with one PM but no answer yet, so i try here: i just want to understand how Fog light PCBs work : if i install 2 Fog light PCBs, - without pushing on the fog light button, the 4 brake light work as usually ( light on when i hit the brake pedal ) - with side light on and if i push the fog light button, there will be 2 brake light who will work as brake light, and two other "brake light" who will still be on .. is it correct ? if yes I'm interested, and if heckler can answer my PM ? Cheers Bastien

hello keron! this one : still searching for a VVTI AIRBOX TWINTURBO, the one who is arrived today from usa is not usable (lot of broken parts) ...

Hi! I have found OEM Vvti induction kit on ebay (USA) still searching for : - clock (analogue) for the dash for a facelift SUPRA - dash air vent (left one) thanks Bastien

i'll take it!

Arghhh too late... if raddys dont' take it, i would take the clock... best regards

Hello Still searching for OEM vvti induction Kit (OEM Airbox + pipe) and now , I'm searching too: - clock for the dash for a facelift SUPRA - dash air vent (left one) (have found 2 seat rails for recaro seat (in Japan)) Best regards Bastien

some news: i have done some work on the car : - new NGK BKR8EIX / new Oil (motul 300V 15W50 + OEM oil filter) / new fuel filter (OEM) I have put greddy speed delimiter and french (for LHD) front headlights, and removed turbo timer . all work must be done before 1st july, because it's the Annual trip ton Nurburgring with some good friends (all dudes have germans cars...) this week-end was fabulous, as every time in the "green hell" (never crashed , so no bad memories .... yet ...!) on the road for the last lap (9 in total in 2 days) : and some pictures "in action" : now, i need to do french papers !!! best regards Bastien

bump! have found one SLD! still searching for OEM vvti induction kit (airbox + pipes) and searching a pair (right and left) of seat rails for recaro please (OEM or bride or anything to put recaros) thanks bye

UP does a HKS SLD type 1 work good on a manual Vvti ?

thanks zeiretto! where did you find your supra? UK ? OEM wheels and without wing : bye

Hello! I have recently bought a TT6 Vvti from japan, and need at least 2 things : - OEM Vvti Airbox + OEM pipe the parts needs to be send in France Thanks Best regards Bastien

Hello! Finally the car is in my garage! OUF !! The return trip (550kms), driving my supra was great, no problem on the car. The oil cooler seem to have a little leak (oily on the rad), but good oil pressure and good level of oil, so need to be checked, but nothing serious I guess! have seen that the car still have the 180kph limit, so searching for a SLD (will post in the wanted part section, I can do that now normally ;-) the horrible spoiler is yet removed, need to clean before installing the OEM one.... not in my house this week end, so need to be patient before doing some work on the car ... sniff Best regards Bastien

Hello! thanks for the advice Hemanhead! I ask for that because i can put my hands on a ssautochrome T61 + downpipe for 530€ and thhougt it was a good price. of course if i put that part, i also need to install fuel pump (have a dw200 new in my garage), an exhaust manifold and a good wastegate (with the good spring, it can control boost no?) injectors can handle 450ch (not a the wheels i guess) , as the seller (of the turbo) says.... but it will be more secure to change it , as you say! my conclusion is maybe I will be wise, and wait to drive the car in is actual form before doing anything crazy! pictures soon, when i can see the car with my own eyes, in 2 weeks! bets regards Bastien

Hello, just a question (maybe will have an answer ?) I don't understand how the mod on this car work . I explain: on an evo, you put parts (exhaust, intake,...) and you make a new mapping in the ECU to maximize power... but on a SUPRA, on the french forum, they said you just put parts, and the stock Ecu do alone the mapping corrections , you can't make a new mapping on the stock ECU (need an AEM one or something like that) so, If I put a new exhaust manifold, a SSautochrome T61 T4 A/R 0.63., downpipe etc,... i just need to mount the parts, adjust the turbo pressure (no more than 0,9 bar with stoks injectors), and have good power ? does it work like I said above? even for a VVTI supra ? with that pressure and that turbo, can I expect 450 ch with reliability ? PS: the car is in bremerhaven in germany, I will have it in my garage a the end of this month!

???

Hello! the car is now near Malta, and normally i will take it approx at the end of May. I have already found OEM wheel (17") with tyres in good condition, OEM headlight for LHD and 2 OEM Wing (one grey need to be paint and one white) thinking about future wheels , in 18, and need some advice: my choice is : japan racing JR18 extrem concave , 18", ET35, 9"5 , the same for all corners tyres: michelin PSS 245/35/18 front and 275/40/18 what do you think about that? best regards Bastien