prosty

BUMP. Anyone selling their coilovers?

Need a set of good working coilovers. Let me know what you have regards

Did not work unfortunately..

Thanks Nic! Great find! No the blown bulb seems to be molded as a one piece, but there are ways to grind down a normal D2S light and remove the collar from a normal halogen 9006 bulb, but that will be my last resort since it's a bit buswack-performance I've e-mailed Vleds.com , their solution with the collar would if it worked be a good one seeing that it will be a much cheaper light option then + warranty on the bulbs + I can get whatever bulb I want. Lot's more options when it's a standard part. Only one supplier active with these rebased units, seemed like it was common 10-13 years ago to buy rebased bulbs, but maybe the HID kits are better now so the difference isn't worth the trouble? regards Markus

Thanks but from what I see these are standard D2S Socket. I need them custom to HB4 (9006) for our low-beam

Hi I have a 94 Eurospec and I have a custom setup Xenon conversion (with euro/uk headlamps). My buls are rebased or machined HB4 Xenon D2S lights. They have a part number which states: 85122 D510 , 35 Watt , D2S, 4300K. Tried searching without luck. Does anyone know if and where you can get these? I've found one source in the US, but in Europe would be prefered http://www.autogoody.com/9006-rebased-4300k-d2s-xenon-hid-bulbs/ The good thing about this kit is that it uses genuine OEM ignitor boxes from philips and real D2S lamps (custom though) so the lighting is superb, however now one bulb is broken. And I can just swap out the bulb and unplug the ignotor box when going to the MOT station (xenon is not allowed in Sweden when you don't have headlight washing + no auto hight adjustment regards

To the top, still looking for the seat heating button!

Bump

Still looking for the seat heater button, bought the TRC button off keron

Seat heater buttons?

I just bought a new one Krister. Cost me about ~100 USD + shipping. Also bought the shifter panel. But looking for the buttons on it now (Seat heater + Trac OFF button)

Yeah I e-mailed you on ebay Got any pics of the UK versions? prosty _at_ rackeltrim.se in that case /M

Does anyone have the TRC + Seat heater buttons for their MKIV supra The part numbers are TRC Button 84988-14020 or 84988-14010 Seat heating 84751-14030 pics Trac Button (the one in the middle) Seat heating And does anyone know if there's a block off plate you can use for the active spoiler (I've removed it) and missing the buttons so I just thought I could get a plate there instead, I think J-specs have it since some of them didn't come with active spoiler? My dash is cut up for a 10" monitor and I'm going back to OEM so that's why I'm missing these items

Sold the car above, but I've again bought my first Supra. it was still at the the buyer that bought it from me, he had kept it for 7 years Really really excited about owning this car again! This is the car I ran 11.61 at the dragstrip, with stock turbos, ecu and fuel. Hopefully matching those numbers later on Some pics taken earlier: Planned mods is putting the stereosystem back to stock, it currently has a computer with a touchscreen monitor in the front, going back to a normal double din. Bought a "new" TRD steering wheel which I'm also putting into the car. And a lot of polish work ofc Nice to be back!

Do you still have this? Wanna sell it? /Markus

Big Bump Need this!

Hi! What is the new/ minimum thickness of the triple (new strapless design) per disc and floater? Thanks!

Wow ! Great that you bought this one!

All cars from 92-93 and on has R134 from factory, it was a new standard by then R12 is freon IIRC? You can go with propane (same as for the camper stove) but I'd go the extra route with the tracer gas and a complete vaccum of the system so you don't mess anything up.

Yeah if it had been awful I would have swapped it out already Really liking the polished items , the previous owner did most of the lids himself! Bought a few from some known sources but I still think this is one of the best looking BPU engine bays.

I'm thinking the same thing, I just bought this car (not owned for a year even) so more other things are important than hoses . But I will do it!

BPU isn't the easiest job getting a good looking engine bay but in my opinion this is one of the more better looking BPU engine bays. Just want black hoses and details for next year.

Finished my detailing of the engine bay today. Some more polished details + black VC + coil cover What do you think? https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-xpa1/t1.0-9/q71/s720x720/10334431_10152461214705259_6316749107322817095_n.jpg https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-xfp1/t1.0-9/q71/s720x720/10371724_10152461214805259_5171412396951321200_n.jpg https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-xpf1/t1.0-9/q71/s720x720/10348374_10152461214840259_3984941587117453204_n.jpg

No they are not available seperately from Toyota, you can buy one from Paul W here on the forums though

Nice Find Mugello. Though the HEL lines doesn't fit as stock but with these you can make it work by using your head a bit Maybe I'll buy these just to be safe too thanks!