BIG BLUE

Yes, that is fine you can have first dibs. I am happy to send you more photos in advance so you can decide if you want it, but I wouldn't want to take it to the Ace Cafe unless I had a confirmed sale. It will take the aeroptop yes, provided you choose a 12" sub without a massive cone like the one I had. - a Pioneer or Kicker shallow would be ideal. Let me know if you want it or some more photos, etc Cheers

I have now sold all my stereo equipment. However I do still have my custom sub box for sale. This mounts below the carpet line (on 3 bolts) to hold any 12" sub (to be mounted upside down) and up to two 'regular' size amps. I am selling the boot build fabrication itself and a professionally trimmed boot carpet to match. Save yourself a lot of hassle and money and buy this rather than try and do it yourself:) Local collection or would bring to the Ace Cafe on 22nd Jan.......

sold

sold to Eki

Good choice of body mods in my view mate. I would suggest that any 5 or 6 spoke 18" rim looks great on a Supra and if you can stretch to a brand with some decent strength, that are not very heavy, you are not limiting yourself in the future.

Bump

good question - hinged mdf panel going in when the plenum / battery box are sorted (I already have all the measurements, having gone through the pain of building an undercarpet sub box previsously, so I can use the top of that as a template)

I have all the dash panels covered in leather bar the gear gaiter panel and the over the speedo panel (which are sprayed in balck / bue pearl). The ash tray and elec window panels are also leather, as is the gear gaiter. I have mounted the Nos switch in the dash and a switch to move me from 0.9 to 1.4 bar boost. These photos aren't he best though - panels are dusty, etc In terms of fitting, you need to take all panels off then get very friendly with the glue and stanley knife - there are no quick wins unfortunately.

I took off all the interior panels for painting, seats, etc and then cut the holes in the carpet I needed, then cut, stuck down and tucked in all the edges before refitting everything. Provided you don't rush it and strip everything first it is a fiddly, but ok ish job.

I managed to pick up 6 meters of acoustic carpet on flea bay for £30 delivered - so I used that. It is actually quite good quality stuff, which surprised me. The seats are Recaro speeds in dreaded leather 'look'. (I can't fit in the full bucket seats and the last leather set I had really creased on the side bolsters, so it was either take a hacksaw to myself or try these! I have been pleased with how tough they have proved)

Cheers, Gaz, etc I will try and post up a few more dash photos at some stage, but cutting the leather around all the panels was a pig to do, but I quite like effect, as it ties in well with the original dash surround, etc and you have to look twice that it wasn't part of the original panels.

Cheers mate Only things left to do are to remount the harnesses to a better / safer angle and get that new plenum in, so that I can position a custom battery box out back...

I have now stripped the rear of my car completely and re-trimmed the boot in grey (a pain of a job but well worth it), fitted a Nos wet kit, rear strut brace, fire extinguisher and a second hand cage from Paul Whiffin. I also have had a mate re-trim my dash, cage and door pads, etc etc in black leather. All boot panels and certain other interior panels have been sprayed black, with a tiny amount of blue mixed in. Take a look, I am pleased with all the effort to date on it

Cheers - as I say I will put up some photos once the carpet it in as that bottle holder does look good when you get the time to getting round to fitting it....

I have just taken out my rear seats and full boot build (the components for which are now residing on Ebay!). So far I have put in a pair of Luke harnesses (a spare set from Paul W's time attack RX) through the Front Recaros, a 5 point cage (I have had this trimmed with black leather pads - I am a tart) and a fire extinguisher. Also just added a polished rear strut and the following, custom sprayed Nos kit, the holder for which looks the nuts in my opinion! I have managed to source some matching interior carpet that I will be fitting this weekend, after which I will put up some photos of the finished job, or take a look at the Ace Cafe! If I say so myself it looks A1! Next phase: changing the plenum over, and relocating the battery to an ally battery box in the back. I don't plan to do too much to the interior after that!

Just realised I have the brochures with me at work: The Kicker impulse amp is model number IX2302 Dimemsions in mm are 63H/241W/482L 900w mono / 450w x 2 To save confusion, the single channel Fusion amp has the same polished mesh style facia so they look matching....

I will pm you some more details later today: power outputs and dimensions, etc Is there anything else specific you would like to know?

- 4000W JBL GTI SUB £150 SOLD - Boot build and carpet £150 NOW £95 - 1 Farad Campower power cap £40 SOLD - 6x9s - MAC Audio component speakers (300w) £50 - Kicker Impulse 2 channel amp (includes mating grille to join to other amps) £100 - Kenwood Graphic equalizer KGC - 9044 (3 outputs) £50

I am selling my Veilside copy plenum and 90mm throttle body. The plenum is mint and looks exactly the same as the real thing. You will struggle to find another. The throttle is in full working order, but was dropped during transit from the States and hence needs re-anodising on the bottom edge to be perfect. I was going to have it fully bored to perfection, a gasket set made up and the runners welded to the main plenum when I had my new head polished and ported. It will bolt straight on, but to do the job 100% this is what I would recommend. I reckon this will take a standard fuel rail, though I am running a Titan one. However I have now decided to go for another make + can be bothered to repair the TB. My price includes postage. With shipping I paid in excess of £400 for this item from the US, a couple of weeks ago, so pick up a bargain.......

Yes - still available....

Bump - I will now take £395 / or will break + have added some extra kit......

£12500!

£125

Daman - pm'd you and will post them out. Conncl Lol - I can't sell you my spoiler, but I can sell you a polished, standard inlet manifold or full boot build!

Sold Jake - I will post them yes / Daman (and if not Nuttynutz) who is going to have them? you fellas agree and pm your address. Cheers