brians25

insured mine with elephant 224 fully comp. phoned and checked the details too, 3000mls limited mileage policy, full no claims

policy came through the day guys an have checked it out, all is well an it is only £224, i only do 3000 miles a year and my mods are covered

mines has got 32 k on the clock too an no tampering

well , just insured my car on elephant.co.uk declared all mods an put my fiancee on for good measure £224 quid for the year with 7 years no claims just posting incase anyone else is due a hefty premium, adrian flux want £700,(aye right then)

how do i get my bonnet open, the cable is busted up inside the front end somewhere i think, i know its a tough one

much appreciated, could have made a right tit of that

whats the plug gap for my denso iridium plugs, standard temp plugs for a j spec, not bpu. cheers in advance

its not the xs power one as that is a trd gen 2 copy an this one has a different style of tailpipe to that one

has anyonegotone of thesefitted, an if so what does it sound like, looking towards the noisy end of things, http://cgi.ebay.co.uk/TOYOTA-SUPRA-MK4-JZA80-TURBO-SS-CAT-BACK-EXHAUST-SYSTEM_W0QQitemZ220188136712QQihZ012QQcategoryZ38786QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

yeah i saw the car on dee irelands lot about 9 month ago, CARS bodyshop in east calder finished of the kit as it was a bit rough rounnd the edges to say the least

http://www.mininova.org/search/?search=slam or http://www.smaragdtorrent.to/search/?search=slam both torrent sires with free downloads ma man

here's mines too

either connect an air line onto the hole for the brake pipe inlet and blow it out or use a grease gun to pump it out wi grease in the same fashion,

yeah earth the wire, , mines is the same its supposed to be so as you can't play video an drive at the same time, stuff that, just earth it an all will be fine

the ebay seller is ricerocket, he is also available on here mate, look earlier on in the thread an you'll see his name

HEY ROB: no wonder you have probs wi your car being rusty, you can't tell the difference between cheap rubber mats an a sheet of steel, maybe thats why the floor fell out of the mk3 as you got it plated wi rubber insted of steel, he he he

they were not to bad to fit at all, the rears took me about 6 hours and the fronts took about 4 to 5 hours each, but for a shade under 300 quid i think that they are really good value, at the end of the day i only keep my cars 4 years tops and get bored an feel the need to move onto something else, ricerocket can supply the covers in any colours or combinations you like, so it allows you a bit of freedom of choice in how you want your interior to look, i am also gonna rip out the dash for a respray in the same colour as the car, thanks for all the positive comments and if anyone else has a set and is having trouble fitting give me a shout, but as i say it is really easy, just take your time and have plenty cable ties to hand

well got around to fitting the covers eventually, not too bad a job and i am delighted with the results, so without further ado here ya go, well worth a sniff under 300 quid if you ask me, not that you did, most of the small creases will come out with use, they were packed away in a box since i got them 2 months ago,the colours are nice and go well with the new paintjob on my supe PICS ARE FURTHER ON DOWN THE PAGE, SORRY

hi mate i am in scotland to, there is a place in bonnybridge, take the m9 from glasgow, think it's called the garage, and also crd in east calder but they are quite expensive

hi all, looking for somewhere close to edinburgh or glasgow to get my car cornerweighted, i live in between the two so either direction is fine, gor a full d2 racing coilover setup fitted and wanting to get the most from it, any help appreciated, cheers in advance

hi guys have any of you got any good setings advice for a set of twin turbo d2 coilovers, i set mines up as it says in the limited instructions supplied with them, and it feels good , but i was just wondering what settings you use ie damper adj front an rear and how many turns pre load on the springs front and rear, would like to get a full cornerweighting done sometime but until then any help or measurement's would be appreciated, cheers bri

hi guys no pics as yet, as you can see by my other posts i only just got my car back from the paintshop last friday, i am now away working again(offshore in india) will probably be about 3 weeks or so before i am home and can get the covers fitted, when i do i will post the results, while i am at it do any of you know where i could get some 10mm foam sheeting from as i would like to bolster some of the seat parts whilst it is apart.

if i buy a set of oem glass headlights from toyota will my jspec bulbs fit them or do i have to get toyota to supply the new lights with bulbs as i was thinking of getting the unit only( toyota in scotland trade price 126 each plus vat)

Can't win them all eh, still very pleased with the end result

yeah filled it up now, was half between full an min level, didn't think it would have made all that mush of a difference . but there ya go. Thanks guys, was just asking incase it was interlinked into the abs or some crazy thing like that.