robby a Posted June 3, 2015 Share Posted June 3, 2015 Can someone tell me what the measurement is from the front edge of the bonnet to the front edge of the scoop please ? Quote Link to comment Share on other sites More sharing options...
Nic Posted June 3, 2015 Share Posted June 3, 2015 http://mkiv.com/techarticles/european_hood_scoop_install/index.html Quote Link to comment Share on other sites More sharing options...
peter richards Posted June 3, 2015 Share Posted June 3, 2015 (edited) the holes are there under the bonnet , if you arnt going to fit the lot no need to cut a big hole , I just cut out the bits where the holes are , four rectangles , bit more fiddly but no water has ever got in Edited June 3, 2015 by peter richards (see edit history) Quote Link to comment Share on other sites More sharing options...
peter richards Posted June 3, 2015 Share Posted June 3, 2015 how time has passed looking at that date , car still looks the same though all these years later Quote Link to comment Share on other sites More sharing options...
robby a Posted June 3, 2015 Author Share Posted June 3, 2015 I don't want to be cutting holes in the bonnet. It's just for aesthetics. I'm gunna be bonding it on and blending the edges. So I just need the measurement to get it in the right place Quote Link to comment Share on other sites More sharing options...
peter richards Posted June 3, 2015 Share Posted June 3, 2015 ah ok ill go and measure it up for you give me five mins Quote Link to comment Share on other sites More sharing options...
peter richards Posted June 3, 2015 Share Posted June 3, 2015 top of the bonnet by the wiper, to top of scoop is 471mm bottom of bonnet to bottom of scoop 412 the side to side just make it the same. and as said mine is located in the holes that are there Quote Link to comment Share on other sites More sharing options...
robby a Posted June 3, 2015 Author Share Posted June 3, 2015 Cheers dude [emoji106] Quote Link to comment Share on other sites More sharing options...
peter richards Posted June 3, 2015 Share Posted June 3, 2015 good luck mate Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.