Bagci Posted June 18, 2012 Share Posted June 18, 2012 I have a Jspec 94 TT and I'm trying to put in a pioneer double din. I bought the ISO lead and it didn't fit, the guy says I have the amplified system and need to plug the ISO harness into the amplifier? Just wondering if someone could point me in the right direction? Thanks Quote Link to comment Share on other sites More sharing options...
ripped_fear Posted June 18, 2012 Share Posted June 18, 2012 Under the passenger seat iirc Quote Link to comment Share on other sites More sharing options...
Bagci Posted June 18, 2012 Author Share Posted June 18, 2012 I'm sorry but what a f'in stupid place to put it, how am I meant to get the ISO lead from there to the back of the head unit? Quote Link to comment Share on other sites More sharing options...
ripped_fear Posted June 18, 2012 Share Posted June 18, 2012 I think there are two different types of ISO leads, one amplified one not, so you need the correct one and it just plugs to the back of the Head unit, I don't think they go direct into the amp. Quote Link to comment Share on other sites More sharing options...
keron Posted June 18, 2012 Share Posted June 18, 2012 the amp wiring will lead upto the n/s of the tunnel behind the stereo under the carpet. there are a few plugs there so may need to go to that. but there are 2 different types of plugs too... look to the left behind the stereo, behind the carpet, it should be a bit clearer then... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.