Pig Posted July 1, 2007 Share Posted July 1, 2007 Im about to purchase a boost controller. I cant decide which one to go for between the new HKS EVC 6 or the Blitz colour jobby. I know the blitz one has the options of lots of sensors e.g oil pressure. (is this a good way to keep an eye on things?) Does the HKS one have this function? If a trader reads this please can you post/pm a price. Thanks Jon Quote Link to comment Share on other sites More sharing options...
tooquicktostop Posted July 1, 2007 Share Posted July 1, 2007 Why dont you run the boost control off the AEM with a switch ? Quote Link to comment Share on other sites More sharing options...
Nic Posted July 1, 2007 Share Posted July 1, 2007 I use to have the i-color and swapped to the HKS EVC VI recently. The i-color has loads of optional graphs, readouts and tweaks, you need the additional sensors for it to show oil pressure, AFR readings, etc. If you're not wanting to clutter up the dash, then it could be a good choice. TBH though, all I used mine for was as a boost controller,s so a lot of the extra features were not needed. As a boost controller it is very good and allows you to map the boost settings against speed, so you you can maximise the boost throughout the different gears. The HKS EVC VI is just a boost controller and is not able to display other readings. The screen is black and white rather than colour, but this makes it a lot clearer when viewing. As a boost controller it is similar in function and performance to the i-color. HKS also sell extra software so that you can connect the EVC VI to a laptop and fine tune the boost settings against, speed, throttle positions, rpms, etc. so you can fine tune the control of the turbos. There is not much to chose between them, they are both very good at what they do, personally I prefer the simple clean design of the EVC VI display. I'll pm you prices. Quote Link to comment Share on other sites More sharing options...
Steve Posted July 1, 2007 Share Posted July 1, 2007 Nic, can you send me the prices too Quote Link to comment Share on other sites More sharing options...
Pig Posted July 1, 2007 Author Share Posted July 1, 2007 Thanks Nic Quote Link to comment Share on other sites More sharing options...
grahamc Posted July 1, 2007 Share Posted July 1, 2007 as tooquick says, running through te ECU, I think you will need a solenoid and switch to control... Quote Link to comment Share on other sites More sharing options...
M4RK RZ Posted September 21, 2007 Share Posted September 21, 2007 I just got a HKS EVC IV Can you give me some info on the softwear please oooh and scramble trigger pics/info Thanks NIC Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.