2JG Posted May 13, 2007 Share Posted May 13, 2007 Need a bit of help please chaps. The water from the nozzles are barely reaching the bottom of my windscreen. The holes aren't blocked and I have adjusted them as far as they will go but still no joy. Don't think its the pump as it's fine for the rear washer, but more the lines for the front as i have noticed water coming out from the bottom of the nozzle covers on the bonnet. Are the lines easy to get to or do I have to remove the lining on the bonnet to get to them? How easy are the covers to remove on the bonnet? Thanks for any help. J EDIT: not to worry, got off my a$$ and had a quick look and i will have to remove the lining on the bonnet to see what the problem is. Quote Link to comment Share on other sites More sharing options...
Havard Posted May 13, 2007 Share Posted May 13, 2007 I'll wait to be corrected but I thought the washers in the bonnet just popped out with a bit of gentle persuasion from a little screwdriver or something!! H. Quote Link to comment Share on other sites More sharing options...
2JG Posted May 13, 2007 Author Share Posted May 13, 2007 they may well H, I was going to go for the easy option first before attempting to damage remove them from the bonnet the clouds are starting to roll in again so i'll try during the week. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.