JohnK Posted June 25, 2002 Share Posted June 25, 2002 I managed to nudge one of my headlight washers the weekend now it seems a little loose in as much as i can push it towards the headlight quite easily but it still seems to be on the bumper solidly. Anyone know how they're fitted and how easy it is to tighten them up? Link to comment Share on other sites More sharing options...
DArby Posted June 25, 2002 Share Posted June 25, 2002 Bit of a bitch, but it can be done. Take out the headlight, remove battery or airbox - depedent on which side. There are a couple of little nuts on the washer that when released will release a metal plate - this has been bent. Reshape, refit and bingo !! I had to redo mine twice - someone knocked one off in my carpark, and the second time i hit a deer !! Dean.. Link to comment Share on other sites More sharing options...
mrboost Posted June 25, 2002 Share Posted June 25, 2002 I would also stick a bit of greese on the nut and screw thread, as they can be a bit of a bugger to take off, I found using a small rachet was the best bet. Hope it all goes well Link to comment Share on other sites More sharing options...
JohnK Posted June 25, 2002 Author Share Posted June 25, 2002 thanks for the info, will have a go when i next get some spare time at the weekend. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now