ADL Mark Posted October 10, 2007 Share Posted October 10, 2007 Can anyone recommend a good USB to Serial adaptor that will work ok under Vista and not get grumpy connecting to things like ECU's and Dataloggers etc.? There's plenty about but I'm not sure about the cheapy ~£25 ones in case they're a bit flakey. I have enough flakiness with Vista Link to comment Share on other sites More sharing options...
ivan Posted October 10, 2007 Share Posted October 10, 2007 You could try contacting the seller/manufacturers of various ones and ask if they will work OK under the conditions you specify. Link to comment Share on other sites More sharing options...
n boost Posted October 11, 2007 Share Posted October 11, 2007 Mate, i had a similiar issue. I tried various different makes but none worked with my e manage cable. I think Belkin fsu-109 is one of the better ones. Link to comment Share on other sites More sharing options...
cheekymonkey Posted October 11, 2007 Share Posted October 11, 2007 To be honest most of them are based off just a coupe of chipsets, so it's all much of a muchness. You start getting problems when the device you're connecting to uses very precise timing, my PIC programmer is like this - as the USB to serial convertors are generallty not "real" RS-232 ports. If you're on a laptop a good option would be a PCMCIA serial port... Link to comment Share on other sites More sharing options...
ADL Mark Posted October 11, 2007 Author Share Posted October 11, 2007 I understand the PCMCIA is better, unfortunately it's a new laptop and only has an ExpressCard slot which really narrows the options. It would probably be easier to get a cheap second hand laptop for just this purpose to be honest.. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now