M4RK RZ Posted October 2, 2007 Share Posted October 2, 2007 Hi chaps - at wiring stage The HKS manual is telling me to splice a wire to the THROTTLE INPUT SIGNAL from my ECU Checked the pi out diagram here :http://www.mkivsupra.net/vbb/attachment.php?attachmentid=13918&d=1112558155 But which is the one I need? there are several throttle related pins? VTO1 or VTA1 ? were guessing the others are for the Idle control Link to comment Share on other sites More sharing options...
kieren1234 Posted October 2, 2007 Share Posted October 2, 2007 i think its the TPS VT101 Link to comment Share on other sites More sharing options...
Ian C Posted October 2, 2007 Share Posted October 2, 2007 Pin B43 VTA1 is the one you want to tap into. -Ian Link to comment Share on other sites More sharing options...
M4RK RZ Posted October 2, 2007 Author Share Posted October 2, 2007 Pin B43 VTA1 is the one you want to tap into. -Ian Is that on the right hand side of the chart I linked up - E9 being the plug number? E9 - 43 ? Link to comment Share on other sites More sharing options...
Ian C Posted October 2, 2007 Share Posted October 2, 2007 Yep, it's also the only plug with more than 40 pins The grainy piccy top right of the pinouts shows E9 (B) and E10 (A) don't ask me why it's designated like that but I use A and B to differentiate as then the only number being quoted is the pin one and thus it saves confusion Theoretically -Ian Link to comment Share on other sites More sharing options...
M4RK RZ Posted October 2, 2007 Author Share Posted October 2, 2007 ahh thanks - off to tap in now..... Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now