molak Posted June 24, 2007 Share Posted June 24, 2007 hi, im in the process of re-building my NA engine. does any1 no how tight the cam shaft caps should be and any other torques i should no?? and is there anything else i should be aware of? Link to comment Share on other sites More sharing options...
Scooter Posted June 24, 2007 Share Posted June 24, 2007 20Nm - 200kgf-cm - 14ft-lb is from the manual.............however there is a about three pages of instructions re rotating the camshafts and loosening/retightening etc........... i could have a go at getting some digi photos for you.........pm me a direct email if you do as it will save me reducing them and loosing detail.......... Link to comment Share on other sites More sharing options...
Scooter Posted June 25, 2007 Share Posted June 25, 2007 1st page Link to comment Share on other sites More sharing options...
Scooter Posted June 25, 2007 Share Posted June 25, 2007 pages 2 & 3 Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now