ADD Posted May 30, 2007 Share Posted May 30, 2007 right guys ive just been thiking, my car is due to be completed soon at pheonix, mark is setting up my boost controller and then Matt H or one of his colleagues is fitting an EMU (+ base map) for my slow journey home. Im then heading down to re-worx in portsmouth to have the car mapped up properly and b/c set up, now if they map it to the highest setting i want, say 1.4 (hybrids) and i want to run 1.2 bar on one of the b/c options, will the ecu recognise that its 1.2 and alter the fuel accordingly? or will it run rich and be dodgy? how exactly do they set the b/c and map the ecu together? any help would be much appreciated ADD Link to comment Share on other sites More sharing options...
Steve Posted May 30, 2007 Share Posted May 30, 2007 I beleive as long as it is mapped up to 1.4 bar, it will be fine on the lower settings. Link to comment Share on other sites More sharing options...
Nic Posted May 30, 2007 Share Posted May 30, 2007 Add with the pressure sensor fitted, the emu will know what boost the car is making and adjust fueling to suit. Link to comment Share on other sites More sharing options...
ADD Posted May 30, 2007 Author Share Posted May 30, 2007 smarty/nic thanks for your info, that was how i though it worked. ad Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now