Lebsteif Posted May 19, 2007 Share Posted May 19, 2007 Hi guys, just to be sure, what kind of sensor does the JDM NA got? pressure or flap? or perhaps a different one Cheers Link to comment Share on other sites More sharing options...
Lebsteif Posted May 19, 2007 Author Share Posted May 19, 2007 And how much pressure can the map sensor hold? Link to comment Share on other sites More sharing options...
Shane Posted May 19, 2007 Share Posted May 19, 2007 Asked basically the same question myself here the other day but to no avail. I have since been looking at clubna-t.com and found quite a bit of info on there. The general concensus on there is that the OEM MAP sensor on the NA jspecs are ok to about 0.2 Bar. I plan to use a small stop valve in line with mine so it only ever sees vacum, this way when in boost it will be at the same status as it is normally at WOT. For me I don't think it is a problem as I am using a Eaton M90 SC and will only be boosting up to about 0.4 bar. Hope this helps. Link to comment Share on other sites More sharing options...
Lebsteif Posted May 20, 2007 Author Share Posted May 20, 2007 Thank you Shane! Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now