chilly Posted April 8, 2007 Share Posted April 8, 2007 Happy Easter all, I'm after some advice, just fitted my new TRD gear knob, but it wont tighten up. Its a bit longer than the stock one so the threads aren't long enough. Any advice on MAKING it fit? Cheers Quote Link to comment Share on other sites More sharing options...
Gaz Walker Posted April 8, 2007 Share Posted April 8, 2007 Hi Paul, Which one is it - some will just not be the same fitment... Gaz. Quote Link to comment Share on other sites More sharing options...
chilly Posted April 8, 2007 Author Share Posted April 8, 2007 Got it through Nic. The gear stem isn't long enough. it gets wider half way down so the gear knob wont screw in enough. Quote Link to comment Share on other sites More sharing options...
Lebsteif Posted April 8, 2007 Share Posted April 8, 2007 Correct, you can;t fix the TRD knob on the stock shifter. Quote Link to comment Share on other sites More sharing options...
AndyT Posted April 8, 2007 Share Posted April 8, 2007 Thank the lord some of the other members aren't commenting yet on this thread title.... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.