Voo51 Posted January 9, 2007 Share Posted January 9, 2007 Hi I have just bought a top secret front from a member on here on its great although i cannot seem to get the front indicaters to fit in the whole, there appears to be two holes- one either side, left and right but not one for the bottom prong and bolt. Do i have to remove this prong? if so, how? as i cannot even seem to get the indicater on with this sticking out. Thanks Link to comment Share on other sites More sharing options...
AlanM Posted January 9, 2007 Share Posted January 9, 2007 Some of the "How To's ...." on here for clear front indicators say you have to drill a 3rd hole Link to comment Share on other sites More sharing options...
Voo51 Posted January 9, 2007 Author Share Posted January 9, 2007 that would be fair enough but i still couldnt get it in it i did, does anyone know hoe the progs/bolt arms are fitted? or itt have to get them cut off!! Thankyou though Link to comment Share on other sites More sharing options...
colsoop Posted January 9, 2007 Share Posted January 9, 2007 IIRC some of the top secret bumpers dont allow fitment of the facelift indicators. Link to comment Share on other sites More sharing options...
Voo51 Posted January 9, 2007 Author Share Posted January 9, 2007 its for pre facelift indicaters- i have them, ill just go to a metal man and have them cut off i think. Link to comment Share on other sites More sharing options...
Sheefa Posted January 9, 2007 Share Posted January 9, 2007 Jesus Vic, I wouldn't fit my own bumper because I suck! Good choice with the TS, my choice for sure in April time too. Did the previous owner have the bumper indicators installed, or not? A little play is probably all that's needed, but maybe an idea to get a bodyshop to fit just in case things go wrong with the metal grinder. Good luck Greg Link to comment Share on other sites More sharing options...
Voo51 Posted January 9, 2007 Author Share Posted January 9, 2007 Hey Greg! The previous owner i think has had the indicaters fitted in his new bumper and a bodyshop did it for him. I think ill have another go tomorrow! Link to comment Share on other sites More sharing options...
Bob Posted January 9, 2007 Share Posted January 9, 2007 You can rip the metal prongs out with a pair of pliers if you heat up the plastic a bit first, then you can always glue them back in later. Link to comment Share on other sites More sharing options...
garetheves Posted January 9, 2007 Share Posted January 9, 2007 Hey Voo, the ones that were in the bumper are currently sitting in my new bumper, they only have the 2 bolts at the back, not one on the underside. The ones i sent you were a spare pair i had and must admit i just assumed they would only have the 2 bolts as well as i thought only the facelift ones had the 3rd bolt. You can either cut the bolt off which isnt a difficult job or if you are happy with tinted front indicators then ill swap you for the ones that i have fitted at the moment. Ive got some facelift ones waiting to go in anyway so no problem for me. Let me know what you want to do. Glad it arrived finally anyway. Link to comment Share on other sites More sharing options...
Voo51 Posted January 10, 2007 Author Share Posted January 10, 2007 its ok Gaz i have done it thanks to Bobs suggestion, worked a treat and was so easy. Thanks again:d Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now