Voo51 Posted December 30, 2006 Share Posted December 30, 2006 Hey I am replacing my carpet, got the front seats out and the back rest to the rear seats, how do i get the bottom part of the bench off? i have tryed pulling it towards me, up, all directions but its not coming out, there seems to be two parts holding it in. There is a bit of play but not much and im knackered from trying, any suggestions?! Link to comment Share on other sites More sharing options...
RobSheffield Posted December 30, 2006 Share Posted December 30, 2006 Remove the bolts on those two parts. Link to comment Share on other sites More sharing options...
Soonto_HAS_soop Posted December 30, 2006 Share Posted December 30, 2006 Pull upwards on the front section. It's held by two clips, one either side, that need a good pulling upwards. The seat will flex a lot when pulling it off, so don't worry too much if it moves about. Link to comment Share on other sites More sharing options...
Soonto_HAS_soop Posted December 30, 2006 Share Posted December 30, 2006 Remove the bolts on those two parts. No bolts on the bottom section fella. Link to comment Share on other sites More sharing options...
RobSheffield Posted December 30, 2006 Share Posted December 30, 2006 No bolts on the bottom section fella. You would hope there was - for reference i mean the hinge part Thinking back, its the hooks that will be holding it in. so its a case of pulling front upwards iirc. Link to comment Share on other sites More sharing options...
Voo51 Posted December 30, 2006 Author Share Posted December 30, 2006 Im scared of snapping or breaking them!!! Link to comment Share on other sites More sharing options...
RobSheffield Posted December 30, 2006 Share Posted December 30, 2006 Dont think you will do. its got two 'hook' type things on it. Its a while since i removed mine, but have a look for pics of them off the car. Link to comment Share on other sites More sharing options...
Soonto_HAS_soop Posted December 30, 2006 Share Posted December 30, 2006 You would hope there was - for reference i mean the hinge part Thinking back, its the hooks that will be holding it in. so its a case of pulling front upwards iirc. Hinge part is for the back upright of the seat, the base is just those two metal clips. Best grab the front of the seat, do one side at a time, in the area that each person would sit and then pull up. You'll get a feel for where the clips are and then concentrate around them. Link to comment Share on other sites More sharing options...
Voo51 Posted December 31, 2006 Author Share Posted December 31, 2006 Thankyou i will give it another go tonight Link to comment Share on other sites More sharing options...
Bob Posted January 1, 2007 Share Posted January 1, 2007 Thankyou i will give it another go tonight I'm off work for the rest of the week, so feel free to pop round if you're still unsure Link to comment Share on other sites More sharing options...
colsoop Posted January 2, 2007 Share Posted January 2, 2007 If it is stubborn, push the seatbelt clips through their hols first, then reach under the front of the seat and pull up it is just held in by 2 plastic mounts, don't be scared they wont break Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now