adi2009 Posted December 17, 2006 Share Posted December 17, 2006 I just installed the EMU on my Jspec TT. The car doesnt idle well now and runs very rich (with no changes to any maps). The idle is very inconsistant as well, the rpm keeps fluctuating between 1000 and 1200. There is a prominent misfire that i can hear in the ignition. I have connected the Injector adaptor #2. It has been connected between the ECU and Emanage (the injector signal going into the EMU from the ECU), is that how it is supposed to be done??? I have not made any changes to the maps. So ideally, shouldnt it run just fine. My car is a BPU TT. thanks Link to comment Share on other sites More sharing options...
Inferno Posted December 17, 2006 Share Posted December 17, 2006 Has it been professionally tuned? I have a Jspec TT and I have no idle problems and I'm not even using the injector adapter #2. No high RPM or running rich problems... Link to comment Share on other sites More sharing options...
adi2009 Posted December 17, 2006 Author Share Posted December 17, 2006 I havent made any adjustments to any of the maps yet, so not yet professionally tuned. Link to comment Share on other sites More sharing options...
Tricky-Ricky Posted December 17, 2006 Share Posted December 17, 2006 What have you set the injector lag time to? i found it made a big difference, the inbuilt setting is o.9 and i found that it ran very rich and lumpy so i changed it to 0.4 much better:) Link to comment Share on other sites More sharing options...
adi2009 Posted December 18, 2006 Author Share Posted December 18, 2006 I read a post of yours previously in which u had stated that 0.4 lag time made the engine run smoother. I tried it, it ran a tad bit better but there was still an audible amount of misfire occuring. The engine also runs at a higher RPM. Is the way I have installed the Injector adaptor #2 correct? Link to comment Share on other sites More sharing options...
Inferno Posted December 18, 2006 Share Posted December 18, 2006 Try this: http://mkivsupra.net/vbb/showpost.php?p=646243&postcount=27 and this: http://mkivsupra.net/vbb/showpost.php?p=646725&postcount=28 Also, what version of firmare are you running? Try upgrading to the latest: http://www.mohdparts.com/emanage/index.html#E-manage%20Software%20&%20Firmware Link to comment Share on other sites More sharing options...
Tricky-Ricky Posted December 18, 2006 Share Posted December 18, 2006 This is the IJ adaptor diagram http://www.mohdparts.com/emanage/emu_special_adaptors/15901504_wires_translated.jpg are you sure that the miss is not just the ECU hunting for stoic mine get a bit noticeable at times. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now