Roy Posted May 24, 2004 Share Posted May 24, 2004 hi guys - just after a bit of advice. when replacing blown turbos, is there anything else that needs doing at the same time ie. seals etc or is there anything that is recommended that should be done to ensure longevity, reliability etc etc. all your thoughts are appreciated. TIA .... Link to comment Share on other sites More sharing options...
eyefi Posted May 24, 2004 Share Posted May 24, 2004 not sure what u mean, r u replacing with 2nd hand turbos? Link to comment Share on other sites More sharing options...
TLicense Posted May 24, 2004 Share Posted May 24, 2004 eyefi, just take a quick peek above his avatar..... Link to comment Share on other sites More sharing options...
Roy Posted May 24, 2004 Author Share Posted May 24, 2004 yep - just replacing jap stockers with another set of jap stockers Link to comment Share on other sites More sharing options...
LeeT Posted May 24, 2004 Share Posted May 24, 2004 Originally posted by TLicense eyefi, just take a quick peek above his avatar..... that means he blown 1 stock turbo and now only running one. doesn't it? your not going single are you roy? Link to comment Share on other sites More sharing options...
Roy Posted May 24, 2004 Author Share Posted May 24, 2004 give the spoiler stealer a gold star .................. nah - just kidding mate. am not going single - just don't like the delivery of the power.......... Link to comment Share on other sites More sharing options...
LeeT Posted May 24, 2004 Share Posted May 24, 2004 Originally posted by Roy give the spoiler stealer a gold star .................. nah - just kidding mate. am not going single - just don't like the delivery of the power.......... hybrids? i didnt steal anything i acquired from some fool who wanted to go wingless Link to comment Share on other sites More sharing options...
Roy Posted May 24, 2004 Author Share Posted May 24, 2004 Originally posted by leett hybrids? i didnt steal anything i acquired from some fool who wanted to go wingless - that was a classic line mate !! nah - not hybrids - just stockers ..... Link to comment Share on other sites More sharing options...
Roy Posted May 24, 2004 Author Share Posted May 24, 2004 bttt ...... Link to comment Share on other sites More sharing options...
CJ Posted May 24, 2004 Share Posted May 24, 2004 Originally posted by leett hybrids? i didnt steal anything i acquired from some fool who wanted to go wingless Via a middle man Link to comment Share on other sites More sharing options...
LeeT Posted May 24, 2004 Share Posted May 24, 2004 Originally posted by CJ Via a middle man i dont think we're helping him much are we? back to the top for the wingless wonder:p Link to comment Share on other sites More sharing options...
Earthrokka Posted May 24, 2004 Share Posted May 24, 2004 Get them Turbos replaced ASAP .. as we are doing that little trip in mid July when i ´m back Good luck eeezzzyyy Link to comment Share on other sites More sharing options...
Dragonball Posted May 24, 2004 Share Posted May 24, 2004 Originally posted by Roy hi guys - just after a bit of advice. when replacing blown turbos, is there anything else that needs doing at the same time ie. seals etc or is there anything that is recommended that should be done to ensure longevity, reliability etc etc. all your thoughts are appreciated. TIA .... You need al the gaskets replacing - these are £100 from toyota Do NOT re-use the old gaskets! Why dont you just get the damn things refurbed - for £600 you get peace of mind - rather than spending just a couple less and getting second hand that might do an Ashley on ya? (note - doing an Ashley = blowing your second hand ones up after 100 miles!!) Link to comment Share on other sites More sharing options...
eyefi Posted May 24, 2004 Share Posted May 24, 2004 its alot of hassle to swap em over, so id get a refurb done unless yr confident in their history. to get em resealed is about £120 from turbo technics, that doesnt include new bearings, but they will test the bearing spec, that way u get new seals (what make turbos smoke) and peace of mind that the bearing is in spec. if its out of spec u'll b glad u didnt fit em. hth Link to comment Share on other sites More sharing options...
matt Posted May 24, 2004 Share Posted May 24, 2004 Make sure the oil return pipes are clean .... and use new gaskets. Prime the turbos with oil before connecting the feed pipes. If the correct tools are used and the nuts/bolts are in good shape its not a bad job..... replace any nuts/bolts that are even slightly damaged on removal. I got the stockers off in a couple hrs .... but the fasteners were all in good nick I might have the oil return gaskets and manifold to head sealing rings kicking around the shed if Toyota have to order... I'd also get the manifold drilled for an egt probe whilst its stripped.. Link to comment Share on other sites More sharing options...
Roy Posted May 25, 2004 Author Share Posted May 25, 2004 paul - your concern and excellent advice is much appreciated. if it comes to that - i haven't totally gone off the re-furb idea YET ! eyefi/matt - thanks so much. so gotta remember seals, gaskets, oil feed pipes and to remember to prime them. matt - i take your point re the fasteners and nuts/bolts. will PM you if i need the gaskets n seals from ya. thanks. (manifold already drilled for EGT) Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now