michael Posted September 19, 2006 Share Posted September 19, 2006 I'm going to replace my lower hatch rest / rubber thingy soon but before I rip the existing one to pieces to get at the fixings with a blowtorch I want to have some new ones to replace them. Can anyone give me the size of the standard ones so I can stock up on hex bolts to put in instead? I'm hoping someone has done the same and and can remember what size they bought (I know a lot of other hatch rubber threads are in tech, this didn't seem worthy and a search of older ones didn't reveal much about the fixings, I guess a lot of people reuse them?) Link to comment Share on other sites More sharing options...
Burna Posted September 19, 2006 Share Posted September 19, 2006 I would fit cap heads Michael, sorry don't know the exact size. Link to comment Share on other sites More sharing options...
Ark Posted September 19, 2006 Share Posted September 19, 2006 If you can wait until this evening, I can get you the part number I bought. Costs about 20p for the proper screws from Mr T. Oh, and they are cross-headed screws with a hex-head machined on, so both options available. Link to comment Share on other sites More sharing options...
michael Posted September 19, 2006 Author Share Posted September 19, 2006 Sounds like a plan, I'll hang fire Cheers Link to comment Share on other sites More sharing options...
Burna Posted September 19, 2006 Share Posted September 19, 2006 Ok just got one out and it's a M5 x 12mm long St/St Cap Head. I might have some self colour ones hanging about the factory if you need some, or I can get some St/St ones if you want Link to comment Share on other sites More sharing options...
michael Posted September 19, 2006 Author Share Posted September 19, 2006 Group buy? Link to comment Share on other sites More sharing options...
Burna Posted September 19, 2006 Share Posted September 19, 2006 Ok spoke to my supplier and he's sending me four stainless ones as samples, yours if you want them Michael Link to comment Share on other sites More sharing options...
michael Posted September 19, 2006 Author Share Posted September 19, 2006 Ok spoke to my supplier and he's sending me four stainless ones as samples, yours if you want them Michael Yes please, how much do I owe you for your troubles? Link to comment Share on other sites More sharing options...
supRo Posted September 19, 2006 Share Posted September 19, 2006 Yup, get the bolts from Mr T. I think the bolts have now been revised too. You might be lucky and the bolts might not be glued into the body like it was when I did mines. Ro Link to comment Share on other sites More sharing options...
Burna Posted September 19, 2006 Share Posted September 19, 2006 Yes please, how much do I owe you for your troubles? Nothing mate, they are free to me Just PM me your address and as soon as they arrive I will send them out. I should get them tomorrow so I reckon you will have them for the weekend Link to comment Share on other sites More sharing options...
Ark Posted September 21, 2006 Share Posted September 21, 2006 If you want the genuine Mr T part: T90159-50116 You'll need 4 screws. Link to comment Share on other sites More sharing options...
Burna Posted September 21, 2006 Share Posted September 21, 2006 If anyone else wants some of the stainless steel cap head (allen key) ones I'll bring a box full to Jap Show Finale and I'll dish them out, let me know. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now