Steve Posted August 25, 2006 Share Posted August 25, 2006 How easy is it to make a stock rail dual feed? What is needed to do this? Can anyone do this? Thanks Link to comment Share on other sites More sharing options...
Wez Posted August 25, 2006 Share Posted August 25, 2006 It has been done many times before, a search should kick up some stuff for you. Not sure how much of a requirement it is though. Link to comment Share on other sites More sharing options...
LeeT Posted August 25, 2006 Share Posted August 25, 2006 How easy is it to make a stock rail dual feed? What is needed to do this? Can anyone do this? Thanks i done mine with no problems. you just need the right size drills and taps to suit the -6an fitting you are going to be using. I tapped mine out the same thread as the other end which was m12x1.25 then used a M12x1.25/-6an adapter Link to comment Share on other sites More sharing options...
Wez Posted August 25, 2006 Share Posted August 25, 2006 http://www.mkivsupra.net/vbb/showthread.php?t=63652&highlight=dual+feed Link to comment Share on other sites More sharing options...
JamieP Posted August 25, 2006 Share Posted August 25, 2006 Mine has been done by turbofit. Link to comment Share on other sites More sharing options...
Steve Posted August 25, 2006 Author Share Posted August 25, 2006 Anyone got any pics of a modified fuel rail? I am only thinking of doing this as i will be going single soon. I am running PE650cc injectors, just want to make sure that there is plenty of fuel around all the injectors, especially around number 1. Link to comment Share on other sites More sharing options...
JamieP Posted August 25, 2006 Share Posted August 25, 2006 best i can do;) Link to comment Share on other sites More sharing options...
Steve Posted August 25, 2006 Author Share Posted August 25, 2006 Cheers for that Jamie. I presume you are running dual pumps with your car? Think i would only need to put a 'Y Piece' from my feed line to both ends of the rail. Link to comment Share on other sites More sharing options...
JamieP Posted August 25, 2006 Share Posted August 25, 2006 yes im on twin pumps. Link to comment Share on other sites More sharing options...
Steve Posted August 25, 2006 Author Share Posted August 25, 2006 Jamie do you know how much Turbofit charged you to do this? I have a -6 line coming to remove the fuel dampener so would need a Y piece from that then bits of pipe from the y to both ends of the rail. Link to comment Share on other sites More sharing options...
BURT Posted August 25, 2006 Share Posted August 25, 2006 here you go.. cost about £35 with the fittings Link to comment Share on other sites More sharing options...
Steve Posted August 25, 2006 Author Share Posted August 25, 2006 here you go.. cost about £35 with the fittings Would you be willing to drill mine for me mate and supply the fittings? Obviously for a fee Would rather someone who has done this before do it rather than me mess it up Link to comment Share on other sites More sharing options...
BURT Posted August 25, 2006 Share Posted August 25, 2006 where abouts are you matey?? Link to comment Share on other sites More sharing options...
Steve Posted August 25, 2006 Author Share Posted August 25, 2006 Northants mate, but can send you the rail in the post, its in bits at the minute anyway Link to comment Share on other sites More sharing options...
JamieP Posted August 25, 2006 Share Posted August 25, 2006 Jamie do you know how much Turbofit charged you to do this? I have a -6 line coming to remove the fuel dampener so would need a Y piece from that then bits of pipe from the y to both ends of the rail. I cant remember but it aint much.. best to phone greg. Link to comment Share on other sites More sharing options...
BURT Posted August 25, 2006 Share Posted August 25, 2006 Northants mate, but can send you the rail in the post, its in bits at the minute anyway send it to pheonix bud... give mark a call on 01923228484. he is not far from you bud, Link to comment Share on other sites More sharing options...
Steve Posted August 25, 2006 Author Share Posted August 25, 2006 Thanks guys, will have a ring round. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now