Guest gzaerojon Posted June 16, 2006 Share Posted June 16, 2006 keeps going off, when i disarm it i get 4 beeps anyone know what this is? or has a beep code description? it was fitted to the car and i didn't get a manual with it cheers Link to comment Share on other sites More sharing options...
spidermonkey Posted June 16, 2006 Share Posted June 16, 2006 I have a toad alarm, mine beeps 4 times if the alarm has gone off (to tell you the car may have been tampered with), ill see if i can dig out the manual for you:) Link to comment Share on other sites More sharing options...
Guest gzaerojon Posted June 16, 2006 Share Posted June 16, 2006 thanks mate its driving the street mad Link to comment Share on other sites More sharing options...
LeeT Posted June 16, 2006 Share Posted June 16, 2006 pm Dragon. he is an accredited toad alarm installer Link to comment Share on other sites More sharing options...
Guest gzaerojon Posted June 16, 2006 Share Posted June 16, 2006 cheers lee, just pm'd him Link to comment Share on other sites More sharing options...
Todd Posted June 16, 2006 Share Posted June 16, 2006 Should help Link to comment Share on other sites More sharing options...
Guest gzaerojon Posted June 16, 2006 Share Posted June 16, 2006 thanks todd, i havn't taken notice on the led flashes yet Link to comment Share on other sites More sharing options...
iainc Posted June 17, 2006 Share Posted June 17, 2006 there is a toad alarm on the wifes car and that sets off when it is parked on a slight angle, fine when its on the flat though. Link to comment Share on other sites More sharing options...
Lucifer Posted June 18, 2006 Share Posted June 18, 2006 there is a toad alarm on the wifes car and that sets off when it is parked on a slight angle, fine when its on the flat though. YOu must have the tilt option set. You can adjust that too. Link to comment Share on other sites More sharing options...
Matt Harwood Posted June 18, 2006 Share Posted June 18, 2006 YOu must have the tilt option set. You can adjust that too. There's no adjustment on the Toad tilt sensor. It's auto adjusting to allow for the different gradients the car may be parked at. Could be a duff sensor though. Need to check your trigger code when the alarm goes off next. Should be easy to fix though. Link to comment Share on other sites More sharing options...
Lucifer Posted June 18, 2006 Share Posted June 18, 2006 OH, so what the box with the adjust er onit? Always though it was the tilt sensor. Link to comment Share on other sites More sharing options...
Matt Harwood Posted June 18, 2006 Share Posted June 18, 2006 Nahh, That's for the ultrasonics Link to comment Share on other sites More sharing options...
Supradan Posted June 18, 2006 Share Posted June 18, 2006 I have a toad alarm with microwave sensors which detect bodies of water(ie people ) trouble is where i park my car there is a drain so if its raining the bloody water running through the drain keeps setting my alarm off doh i have adjusted the sensors but then i dont get the protection for the outside of the car Sometimes i think alarms are more trouble than they are worth!! Link to comment Share on other sites More sharing options...
Matt Harwood Posted June 18, 2006 Share Posted June 18, 2006 You do realise you can bypass that sensor for one cycle, but still have the rest of the alarms protection? Link to comment Share on other sites More sharing options...
iainc Posted June 20, 2006 Share Posted June 20, 2006 from the list above it says its the boot/bonnet. Link to comment Share on other sites More sharing options...
Matt Harwood Posted June 20, 2006 Share Posted June 20, 2006 Almost certainly the bonnet switch then. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now