charlton Posted May 31, 2006 Share Posted May 31, 2006 I know there are loads of threads on these things and they seem to come up every month but I cant find the answer to my question. I've just been sanding down my dash to spray it and have aquired a blister or two but it occured to me that you cannot remove the gator from the gear stick as it is stuck down. To the guys who have sprayed their dashes themselves... how did you get around this? did you tape down the surround remove it and stick it back on or what? Link to comment Share on other sites More sharing options...
supRo Posted May 31, 2006 Share Posted May 31, 2006 Yup, masking tape. Link to comment Share on other sites More sharing options...
Steviekid Posted May 31, 2006 Share Posted May 31, 2006 You have to (carefully) snap the plastic welds between the panel and the plastic ring on the underside. I then superglued the gaitor back on to the underside of the panel! Link to comment Share on other sites More sharing options...
charlton Posted May 31, 2006 Author Share Posted May 31, 2006 I like both ideas but carefully does't go well with me, if it can go wrong it will with me!!! Link to comment Share on other sites More sharing options...
supragold Posted May 31, 2006 Share Posted May 31, 2006 I masked it up Link to comment Share on other sites More sharing options...
Daston Posted May 31, 2006 Share Posted May 31, 2006 I cut a cerial packet out to fit the large whole (you may need an adult to help with the cutting) I then used sticky back plastic to cover the parts it missed and then could resist tring to make Tracey Island Link to comment Share on other sites More sharing options...
SUPRALOOPY Posted May 31, 2006 Share Posted May 31, 2006 I cut a cerial packet out to fit the large whole (you may need an adult to help with the cutting) I then used sticky back plastic to cover the parts it missed and then could resist tring to make Tracey Island PMSL:D Link to comment Share on other sites More sharing options...
charlton Posted June 4, 2006 Author Share Posted June 4, 2006 I've removed most of the rubber from the dash but I am having a few issues with the tighter gaps like where the recess is for the screws on the top part of the dash and where the small displays are telling you that your door is open etc. How did you guys get in these gaps? Do you have any suggestions or tips? Link to comment Share on other sites More sharing options...
Steviekid Posted June 4, 2006 Share Posted June 4, 2006 I've removed most of the rubber from the dash but I am having a few issues with the tighter gaps like where the recess is for the screws on the top part of the dash and where the small displays are telling you that your door is open etc. How did you guys get in these gaps? Do you have any suggestions or tips? Pour nail varnish remover on it, wrap a thin bit of cloth over a small flat headed screwdriver and carefully scrub it off. Needs a great deal of patience!! Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now