TLicense Posted May 9, 2006 Share Posted May 9, 2006 There's nothing more satisfying than stripping an engine down to find out why it's blown up and finding a suitably mangled part. Post 'em up if you've got them... I'll start with a piston from my old MR2. The big end bearing went and I didn't realise what had gone wrong till it was all too late. Once that had gone there would be no oil travelling to up the conrod and to the piston. End result..... Link to comment Share on other sites More sharing options...
Pete Posted May 9, 2006 Share Posted May 9, 2006 That's certainly not what it's meant to look like. Link to comment Share on other sites More sharing options...
ivan Posted May 9, 2006 Share Posted May 9, 2006 Managed to blow up my old MX6 chasing an RX7 (stupid, I know...) Also screwed the diff and had to replace the box too. Link to comment Share on other sites More sharing options...
Guest Usmann A Posted May 9, 2006 Share Posted May 9, 2006 gota find pics of my rod bolt failure on a 2JZ. cracked piston, twiested,bent rod, no bearings left, and hole in the side of the block. Link to comment Share on other sites More sharing options...
squiffy Posted May 10, 2006 Share Posted May 10, 2006 melted a piston in my chavalier turbo, will try and did it out and take some pics Link to comment Share on other sites More sharing options...
monkey76364 Posted May 10, 2006 Share Posted May 10, 2006 WOW ... Not really the sort of pics you like to have to take. I just hope I dont ever have any major problems like that !!! Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now