Jump to content
The mkiv Supra Owners Club

Thor VFCC not working-Help Please


Guest scudszone

Recommended Posts

Guest scudszone

I recently fitted a AVC-R boost controller and when it hits 1.1 bar for a few seconds the fuel cuts. Now i have had a Thor VFCC fitted for a while and hadnt been reaching the 1.1 mark even with a full decat. The overboost is set to "F" and the Fuel Cut to "8". Ive tried the Fuel cut all the way down to "1" and it makes no difference.

 

Any ideas anyone

Link to comment
Share on other sites

Guest scudszone

Went out and can see the green and red light flashing. At about 65000 in third and fourth it cuts but no Hazzard triangle. Could the Avc-r be doing something. I raised it to 1.2 and it went slightly over (1.25) and still cut at 65000......

Link to comment
Share on other sites

I didn't always get the hazard triangle on mine when fuel cut kicked in.

 

You said you tried moving Fuel-cut selector down to 1.. I think you should be lookng to move it the other way, but I really really can't remember now. It's all on the Thor site in the install guide.

Link to comment
Share on other sites

Guest scudszone

Ha Ha 6500 revs.

The Thor site says to go from 8 to 7 if fuel cut still occurs. havent tried going to 9 but worth a try i suppose...

Link to comment
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. You might also be interested in our Guidelines, Privacy Policy and Terms of Use.