wilfman Posted December 6, 2003 Share Posted December 6, 2003 Hi, Had the RLTC this week, what an awesome bit of Kit! However it is running on the std settings at the min and I am trying to apply one of Terminators dats. I can run the Racelogic Windows App to view the RLTC settings fine. However, when I try to use Grahams app to view/load the new dat it cannot connect to the RLTC. I am using a laptop with XP SP1 and using a USB-Serial port to connect. Anyone encountered a problem like this before Cheers Link to comment Share on other sites More sharing options...
Billy Posted December 6, 2003 Share Posted December 6, 2003 i had the same problem it turned out to be that the com port on my lap top was set up incorectly. got a mate to assign the serial port on the lap top to com 3 then selected com 3 in the rl software and all was ok. if you think that the stock settings are good youre going to love terminators dat file Link to comment Share on other sites More sharing options...
Terminator Posted December 6, 2003 Share Posted December 6, 2003 Check Task Manager to see if you have anything that my be using com1. I know Road Angel causes conflict with RL hook ups unless it is closed before I hook up to the RL unit, as it is automatically going to com 1 on startup. I had a laptop that had no RS232 port only USB and it was no good for using RL. Be careful using the RL app for anying other than veiwing files. Link to comment Share on other sites More sharing options...
MONKEYmark Posted December 7, 2003 Share Posted December 7, 2003 hi what pc lead do you need to get rltc on pc i have never changed mine as i dont have a lap top. built a small pc for clifford alarm and rltc and other stuff is it a female serial to male serial? would not mind having a look at changing dats and saving original ones to disk and what software you use to read and change settings. dont know what i did with my floppy disk thanks Link to comment Share on other sites More sharing options...
wilfman Posted December 7, 2003 Author Share Posted December 7, 2003 Managed to get it working this morning. I found if I powered up the laptop with the USB serial port + Racelogic connected then it worked fine. Phil - your dat file is the dogs b***ocks - many thanks. Do you want the original settings file? Link to comment Share on other sites More sharing options...
Terminator Posted December 7, 2003 Share Posted December 7, 2003 Wilfman No thanks I think I have seen enough rubbish dats, nothing surprises me anymore. I am glad to have been assistance and that you are enjoying the improvements. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now