JohnK Posted April 24, 2006 Share Posted April 24, 2006 I am considering putting a Manual diff inside my auto case. When recasing the stock LSD like this, is there any setting up of the diff that needs to be done? Link to comment Share on other sites More sharing options...
bignum Posted April 24, 2006 Share Posted April 24, 2006 i dont think there is mate, its only the plate type diffs that have their preloads setup. Link to comment Share on other sites More sharing options...
JohnK Posted April 24, 2006 Author Share Posted April 24, 2006 Some diff's requre shimming to achive the correct mesh. I need to know if the MKIV one does. Link to comment Share on other sites More sharing options...
JohnK Posted April 25, 2006 Author Share Posted April 25, 2006 Bump Link to comment Share on other sites More sharing options...
jason m Posted April 25, 2006 Share Posted April 25, 2006 email CW Link to comment Share on other sites More sharing options...
Chris Wilson Posted April 26, 2006 Share Posted April 26, 2006 It'll need the pinion height and preload setting, and the crownwheel to pinion backlash setting. PITA. Link to comment Share on other sites More sharing options...
JohnK Posted April 26, 2006 Author Share Posted April 26, 2006 Thanks Chris, Ill think ill dump the diff cooler then and use the J-spec diff as intended. Im sure you would approve of this weight saving measure Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now