gauges mounting ?

[anoboss]

i got 3 new gauges from japan (RaceTech). the thing is that the manual is writen in japanese is there anyway to mount them ? I Need Help as soon as possibble.

[Nic]

It's up to you where you want to mount them, I have 2 mounted in a GReddy pillar pod. You can also mount them in place of the clock or airvents.

 

http://img231.imageshack.us/img231/4136/cimg00114gd.jpg

[anoboss]

It's up to you where you want to mount them, I have 2 mounted in a GReddy pillar pod. You can also mount them in place of the clock or airvents.

 

http://img231.imageshack.us/img231/4136/cimg00114gd.jpg

I got a piller pod with three places but the thing is the oil temp gauge come with a small temperature sender and i dont know where and how to install it ?

[Prof. Monkey]

Your best bet would be to buy a greddy oil filter sandwich adapter, then you could fit the sender unit to that and maybe an oil cooler as well!

 

Any of the traders on here could hook you up, fairly sure mkivstore (lucifer) will have them in.

 

The are attached to the flange that the oil filter screws onto, tightened with a 23mm nut, which in turn becomes the flange for the oil filter.

 

30 minutes job to fit and works a treat, just do not overtighten the sandwich plate on!

[anoboss]

this is the stuff http://spaces.msn.com/supraguy/photos/?_c02_owner=1. i just wanna know how to mount the oil gauge and the RPM the volt gauge i know how to mount it .