Jump to content
The mkiv Supra Owners Club

JPS Front Clears


Paul Laing

Recommended Posts

Guest supratt69

I have bought nearly exact replicas from dcdezign.com and they where based on the toyota ones. If the ones you are talking about are the same then you could probably get away with using just the back 2 original holes, but i drillled a third to make sure.

 

the only thing i would say is ask for the bulb holders aswell cos im having trouble finding some.

Link to comment
Share on other sites

Hi Paul,

I got a set of these from JPS last week, they have the two bolts on the back that will fit the original tabs on the bumper (no need for drilling). They also have a third bolt that doesn't line up with the original top hole and is more or less on the side, I removed this as it doesn't seem to serve any purpose on my UK.

The only thing I would say is that ideally you need to fix on top as the bumper tabs flex slightly giving a bit of up and down movement. Just needs some double sided trim tape or similar then sorted!

JPS ones come with bulbs, holders and wire/connectors. Just a case of chopping connectors off on mine and soldering/crimping white to white and green to green......easy.

Mine too is Storm Blue (no pics) and they change the look of the front, go for it and get a set of side repeaters to go with em :thumbs:

 

hope this helps,

Paul

Link to comment
Share on other sites

Trim Tape, I got a five 5 metre roll from an independant motorist place. Halfrauds do sell it though but dearer and in smaller rolls.

It's a black 'foam' tape, usually got glossy green backing that you peel off. Halfrauds also sell it in small strips for fixing mirrors/badges etc.

Both my number plates are put on with it to save drilling, been on a year no probs!

 

Paul

Link to comment
Share on other sites

Originally posted by far

do the JPS ones also have the intergrated side lights ?

Bloody hell, hope I'm on comission here :D

They have a divider in them (not too noticable from front front of lense) and two seperate bulbs, both of mine were supplied orange so the complete unit acts as an indicator with twin bulbs and this is how I wanted/wired it.

If you want you can wire one bulb to your sidelight, have a clear bulb and run low down sidelights :thumbs:

You'll have to ask Leon for two clear/two orange bulbs instead of the four orange he supplied with mine.

 

Paul

Link to comment
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. You might also be interested in our Guidelines, Privacy Policy and Terms of Use.