bignum Posted March 31, 2006 Share Posted March 31, 2006 Hi guys, is there a route into the engine bay on the nearside, as ive just picked up a dual oil temp/pressure gauge from spa, nice bit of kit too, the sensor cables arent long enough to go the normal route down the drivers side wheel arch and i dont fancy cutting and joining the cables, cheers simon. Link to comment Share on other sites More sharing options...
_Rob_ Posted March 31, 2006 Share Posted March 31, 2006 ive got my boost gauge wiredon the passenger side. pull the carpet back in the passenger footwell to reveal the ecu and you should be able to see the hole in the bulkhead where the wire enter the engine bay. in the engine bay they come out close to the charcoal canister. Link to comment Share on other sites More sharing options...
bignum Posted March 31, 2006 Author Share Posted March 31, 2006 cheers for that rob, that will keep me busy tommorow then. Link to comment Share on other sites More sharing options...
carl0s Posted March 31, 2006 Share Posted March 31, 2006 I thought the 'normal' route was near the steering wheel rack or pedals or something (it's been a while since I fitted mine) Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now