CJ Posted March 11, 2006 Share Posted March 11, 2006 I am struggling to find a set of centre caps for my newly acquired Work Wheels. Someone has suggested getting some custom made out of aluminium billett (I think thats what they said ). What sort of company would I contact to get these made? Link to comment Share on other sites More sharing options...
markymark Posted March 12, 2006 Share Posted March 12, 2006 hello m8 i put a thread up in the past on this, didnt get much help so i contacted WORK wheels them self but they were no help so i invented my own, i popped down to tescos bought 4 stainless steel flasks and fitted them using o,rings which i bought down the spare shop (removing the wheels and fitting from the inside) never had any problems with them they stay on solid and they do the job? Link to comment Share on other sites More sharing options...
markymark Posted March 12, 2006 Share Posted March 12, 2006 I am struggling to find a set of centre caps for my newly acquired Work Wheels. Someone has suggested getting some custom made out of aluminium billett (I think thats what they said ). What sort of company would I contact to get these made? have you got any pics of your wheels would be nice to see them Link to comment Share on other sites More sharing options...
CJ Posted March 13, 2006 Author Share Posted March 13, 2006 Here they are - or at least a pic of them. Link to comment Share on other sites More sharing options...
CJ Posted March 13, 2006 Author Share Posted March 13, 2006 Another. Link to comment Share on other sites More sharing options...
ChrisSZ Posted March 13, 2006 Share Posted March 13, 2006 Can you not fit a set from a different wheel? Measure the inner hole bit and find out which manufacturers make something that'll fit. Link to comment Share on other sites More sharing options...
Bobbeh Posted March 13, 2006 Share Posted March 13, 2006 Seen those wheels or ones very similar on a few Supras over here, Im sure someone can point you in the right direction Link to comment Share on other sites More sharing options...
CJ Posted March 13, 2006 Author Share Posted March 13, 2006 Can you not fit a set from a different wheel? Measure the inner hole bit and find out which manufacturers make something that'll fit. That is a possibility. Link to comment Share on other sites More sharing options...
CJ Posted March 13, 2006 Author Share Posted March 13, 2006 Seen those wheels or ones very similar on a few Supras over here, Im sure someone can point you in the right direction I have Gaz and Ibrar on the case but no joy yet. I have also asked Dusty but he says they are a special order and could take months Link to comment Share on other sites More sharing options...
markymark Posted March 13, 2006 Share Posted March 13, 2006 Have you contacted Work wheels themselfs as if im correct and as your pics are showing they do make center caps for that batch of wheels (on my model of wheels they dont but on there newer style wheels they started making them . i done a google search once and there was a company in America which done center caps for certain Work wheels??? Link to comment Share on other sites More sharing options...
CJ Posted March 13, 2006 Author Share Posted March 13, 2006 I sent a message to Work wheels but have had no response as yet. Could you please send me the link to the pople who made the centre caps. Link to comment Share on other sites More sharing options...
markymark Posted March 13, 2006 Share Posted March 13, 2006 http://www.envyperformance.com/index.cfm?fuseaction=product.display&Product_ID=2044&CFID=3848&CFTOKEN=FC4121C7-5477-7C79-AD25823D2F8713A9 try this link maybe they can help? Link to comment Share on other sites More sharing options...
markymark Posted March 13, 2006 Share Posted March 13, 2006 http://www.modacar.com/Merchant2/merchant.mv?Screen=CTGY&Store_Code=M&Category_Code=WORKW This link might be more useful as when searching they do say they sell center caps separately Link to comment Share on other sites More sharing options...
Bobbeh Posted March 14, 2006 Share Posted March 14, 2006 I have Gaz and Ibrar on the case but no joy yet. I have also asked Dusty but he says they are a special order and could take months Thats bad news if Dusty cant help ya! Usman has a set of those, as did Mark Ayling I believe... or VERY similar ones Nice wheel. Link to comment Share on other sites More sharing options...
CJ Posted March 14, 2006 Author Share Posted March 14, 2006 I have good news. Work have put me in touch with another compnay that sells the centre caps. I now need to send them a pic of the wheels (TBH, I am not sure if they are the Meister ones) and then they can supply. In saying that, they are going to cost me $35 each without shipping Link to comment Share on other sites More sharing options...
markymark Posted March 16, 2006 Share Posted March 16, 2006 I have good news. Work have put me in touch with another compnay that sells the centre caps. I now need to send them a pic of the wheels (TBH, I am not sure if they are the Meister ones) and then they can supply. In saying that, they are going to cost me $35 each without shipping there is always them tesco flask lids at £3.85 ish each but everyone to there own taste. Link to comment Share on other sites More sharing options...
TRD3000GT Posted March 16, 2006 Share Posted March 16, 2006 I have good news. Work have put me in touch with another compnay that sells the centre caps. I now need to send them a pic of the wheels (TBH, I am not sure if they are the Meister ones) and then they can supply. In saying that, they are going to cost me $35 each without shipping Ive got a spair set of brand new billet centre caps here that I bought for my CCW's They have no design on them just highly polished they are yours for what I paid for them, just measure the hole that they need to go in to.. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now