SkyJawa Posted August 28, 2003 Share Posted August 28, 2003 I've done a search and go through loads of threads, but they all seem to conflict! HKS = rebadged denso, yeah? Denso - IK22 or IK24 for the Supe, but some say 24 is too cold? (to be for a TT, full decat, super drager, TRL FCD, soon to have blitz boost controller) NGK - not platinum but some say they are better? There seem 3 types you can use, which would be the best? And these would require changing at each service unlike the Denso's but they are cheaper? Right - I think thats about what I sussed from the other threads! So NGK or Denso? and which type? Where can I get them from? Need them pretty soon as my boost is fluctuating when I put my foot down, 1.0 1.1 1.0 1.1 1.0 1.1 etc and think it may be the plugs as they weren't changed when the car was serviced on arrival into the country so no idea what condition they are in! Cheers Neil Link to comment Share on other sites More sharing options...
Alex Posted August 28, 2003 Share Posted August 28, 2003 Denso IK22 = perfect for stock to BPU IK24 = Perfect for BPU - BPU+++ NGK BKR6E = Stock BKR7E = BPU Denso are more expensive but potentially will last longer and take more punishment. Link to comment Share on other sites More sharing options...
Gaz Walker Posted August 28, 2003 Share Posted August 28, 2003 Alex, Do you still buy/sell these? Neil, We'll have IK22, 24s and 27s in stock either tommorow or monday and its one of the items we should always have in. Gaz. Link to comment Share on other sites More sharing options...
SkyJawa Posted August 28, 2003 Author Share Posted August 28, 2003 Cheers Guys So with my mods would I go IK22 or 24? or does it not really matter? I guess something that lasted a little longer would be preferable to me. Gaz - how much mate? Link to comment Share on other sites More sharing options...
Wez Posted August 28, 2003 Share Posted August 28, 2003 I recently installed a set of IK24 set at 0.025 and they work really well. :flame Dev Link to comment Share on other sites More sharing options...
SkyJawa Posted August 28, 2003 Author Share Posted August 28, 2003 Cheers Wez, looks like the IK's get it, just gotta decide on 22 or 24, probably the latter! Link to comment Share on other sites More sharing options...
Alex Posted August 28, 2003 Share Posted August 28, 2003 I can still get them.... Wez - did you change the gap? Cause there is no need to! They come pregapped. They are roughly £10 each I've only got 4 left right now, so if you want the other 2 from me I'll have to order them tomorrow. Link to comment Share on other sites More sharing options...
Sharpie Posted August 28, 2003 Share Posted August 28, 2003 I use IK24's without any problems (Heat range 8) Stock is 6 and I'm at BPU. Link to comment Share on other sites More sharing options...
AJI Posted August 28, 2003 Share Posted August 28, 2003 I think I'll be needing some Denso IK24's aswell.... I'm running 1.2BAR on stock plugs. Gaz - Can you price up what this would cost for 6 plugs? Cheers, AJI Link to comment Share on other sites More sharing options...
Wez Posted August 28, 2003 Share Posted August 28, 2003 i just checked the gap and didn`t need to adjust them :flame Dev Link to comment Share on other sites More sharing options...
SkyJawa Posted August 28, 2003 Author Share Posted August 28, 2003 24's it is then! Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now