mos Posted June 30, 2003 Share Posted June 30, 2003 Right im going to be changing the intake cam on my N/A for a 265 cam with extra lift (though not above 10mm as this can spit the shim out), has anybody else done this or will i be the first N/A. The duration is on advice from TRD. I cannot change the exhaust as it drives the distributor and i cannot find a cam company who make them apart from crower in the U.S. and this would be a re-grind and put my car out of action for longer than possible. Link to comment Share on other sites More sharing options...
Rob Posted July 1, 2003 Share Posted July 1, 2003 ...... tumbleweed ........... which just goes to show all us NA peeps know nuffing about performance mods. Link to comment Share on other sites More sharing options...
GavinL Posted July 1, 2003 Share Posted July 1, 2003 Your a pioneer Have you spoken to Piper about regrinds? Link to comment Share on other sites More sharing options...
mos Posted July 1, 2003 Author Share Posted July 1, 2003 I spoke to either piper or kent but cant remember which one and couldnt get through to the other. The company i spoke to said they were not willing to do a regrind and that was that. I do have another U.K. company lined up but a re-grind will put my car out of action for too long at the moment. If i get good results from the intake then i might get a re-grind on the exhaust when i go to sea in a few months and wont be using the car. The cam is now ordered and i will post when i can to let you all know. Link to comment Share on other sites More sharing options...
Syed Shah Posted July 1, 2003 Share Posted July 1, 2003 Mos, ask around on the NA section of SF. Link to comment Share on other sites More sharing options...
mos Posted August 7, 2003 Author Share Posted August 7, 2003 Okay i got my cam last week and will be fitting it on sat16, unfortunately i go out of country a week later so wont be able to post a dyno run for a while but ill let you all know how it feels, thats if anybody is actually interested Link to comment Share on other sites More sharing options...
Ian C Posted August 8, 2003 Share Posted August 8, 2003 I'm interested in any empirical info on mods -Ian Link to comment Share on other sites More sharing options...
Syed Shah Posted August 8, 2003 Share Posted August 8, 2003 Also interested in your results. Link to comment Share on other sites More sharing options...
Rob Posted August 9, 2003 Share Posted August 9, 2003 Originally posted by mos Okay i got my cam last week and will be fitting it on sat16, unfortunately i go out of country a week later so wont be able to post a dyno run for a while but ill let you all know how it feels, thats if anybody is actually interested Despite my sarky answer, I would be very interested. Your total costs would be good info as well, if you're OK posting them, or PM ing them. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now