S7EVE Posted November 26, 2005 Share Posted November 26, 2005 Picked my wheels up today - finally... Managed to change the rears over no problem. Moved on to the fronts, and do you think the wheel nuts will budge!?! Now, I had some new tyres on the rears at the start of the year, so know these have been removed before. But I doubt the fronts have been changed since being imported. Anyone got any tips for loosening these b**tards! Tried a wrench extension, tried shockin them.. but it looks as though either the wrench will snap or the nut will sheer off. Help Please! Link to comment Share on other sites More sharing options...
Whitesupraboy2 Posted November 26, 2005 Share Posted November 26, 2005 Actually try to tighten the nut then loosen, then tighten again, then loosen again, that normally works for me. eventually it will break loose Link to comment Share on other sites More sharing options...
S7EVE Posted November 26, 2005 Author Share Posted November 26, 2005 Actually try to tighten the nut then loosen, then tighten again, then loosen again, that normally works for me. eventually it will break loose Arr, Didnt think to try this... I've given up for the day now, I'll try again in the morning. Thanks! Link to comment Share on other sites More sharing options...
Soonto_HAS_soop Posted November 26, 2005 Share Posted November 26, 2005 Spray em with loads of WD40 tonight then aswell, and leave them over night. Link to comment Share on other sites More sharing options...
Nic Posted November 26, 2005 Share Posted November 26, 2005 They'll have probably corroded on, try tapping/hitting the top of the wheel nuts with a hammer, this should help loosen them. Link to comment Share on other sites More sharing options...
dangerous brain Posted November 26, 2005 Share Posted November 26, 2005 Get it to a garage and get them to use an impact gun on it otherwise you risk knackering your wheels if you whack the alloy instead of the wheel nut. If you have access to an impact driver you could give that a go but seriously for the few quid they'll charge you get a garage or tyre place to do it. Link to comment Share on other sites More sharing options...
S7EVE Posted November 26, 2005 Author Share Posted November 26, 2005 Thanks for the advice Guys. I've tried tapping with the hammer. But I will try tightening them then loosening them in the morning. but seriously for the few quid they'll charge you get a garage or tyre place to do it. I didnt think this would be a problem tbh, I was going round each wheel and doing the calipers at the same time, so didnt want to get the wheels put on and then have to take them off again once home to do the calipers. But If I have no joy its straight down a garage on Monday. Link to comment Share on other sites More sharing options...
piehound Posted November 26, 2005 Share Posted November 26, 2005 wimp lol get some effort in to it lol Link to comment Share on other sites More sharing options...
JohnA Posted November 26, 2005 Share Posted November 26, 2005 it's better to be a wimp rather than damage the threads and start bigger jobs with the hubs. Link to comment Share on other sites More sharing options...
ivan Posted November 27, 2005 Share Posted November 27, 2005 I want to know how come you've still got a decent set of tyres after all this time? Link to comment Share on other sites More sharing options...
S7EVE Posted November 27, 2005 Author Share Posted November 27, 2005 it's better to be a wimp rather than damage the threads and start bigger jobs with the hubs. I second that! Link to comment Share on other sites More sharing options...
S7EVE Posted November 27, 2005 Author Share Posted November 27, 2005 I want to know how come you've still got a decent set of tyres after all this time? Only use the car at weekends... Try not to pile the miles on... Link to comment Share on other sites More sharing options...
S7EVE Posted November 27, 2005 Author Share Posted November 27, 2005 wimp lol get some effort in to it lol LOL... Link to comment Share on other sites More sharing options...
Guest slow dog Posted November 27, 2005 Share Posted November 27, 2005 Actually try to tighten the nut then loosen, then tighten again, then loosen again, that normally works for me. eventually it will break loose nooooooooooooooooooooooooo if you hit them hard they will stretch the thread then cross thread spray them up get a big bar on it and slowly undo them no idea were you are i am in basingstoke if you need me to do it come over i have the tools for the job Link to comment Share on other sites More sharing options...
piehound Posted November 27, 2005 Share Posted November 27, 2005 oh and if they are so tight you need to use a windy gun tell em to be carefull they will snap the studs off so easily i know ive been there, all the tyre houses here do it by hand and only use mechanical means for speed once the have cracked em loose Link to comment Share on other sites More sharing options...
JohnA Posted November 27, 2005 Share Posted November 27, 2005 ...and when you put them back make sure you use some copper grease lol... Link to comment Share on other sites More sharing options...
S7EVE Posted November 29, 2005 Author Share Posted November 29, 2005 UPDATE: Thanks for all the advice guys, really appreciate it. Managed to get those damn nuts off tonight and jobs done. Just needed a bit of brute force! Guess Im just a Pics to come the weekend. Link to comment Share on other sites More sharing options...
piehound Posted November 29, 2005 Share Posted November 29, 2005 told ya you where a wimp lol well done matey Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now