slowboy Posted November 20, 2005 Share Posted November 20, 2005 Hi I am having a bit of a winter clear out and I have the following parts availble for sale. The following are all from my gold race car, some parts are new some used. USED PARTS 6 point alloy roll cage, bolt in fittings to the floor F-Con ecu the one the car had from Japan mapped to suit 1000cc injectors and big single, up to 2.0 bar, car made just shprt of 800 bhp with this ecu without Nos( piggy back) TRD Diff (modified for drag use) over 200 mph proven complete rear subframe with trick parts ie solid diff mounts, solid chassis mounts, good shafts, extra long wheel studs, disc, calipairs, pads, may split HKS drag spec shocks, as new, very hard to get a hold of. (rears only) Bogart 9.5x15 rear wheels x2 either with or with ouut BFG drag or M/T street ET's ATL fuel cell 4x 325/50/15 BFG drag raidails lots of life still left in them also availble not from my car nearly new mapped for a standish T/T HKS F-CON V PRO ECU with loom. New parts Bogart rear drag alloys with new M/T street ET's 28x11.50x15 also new New M/T rear 9.5 drag Slicks HKS hybrid TURBO T51 drag spec with A/R 1.20 housing on just been fully rebuilt by AET, makes 1000+bhp @ 2.0bar new nito 555R drag spec tyres All parts are in very good condition, they were all in perfect working order when removed, I am open to sensible offers on all parts in the money is not right I will not sell them, these are all from a proven 9 second car, please either e-mail me on [email protected] or call me on 01506-880411 office hours Link to comment Share on other sites More sharing options...
Branners Posted November 20, 2005 Share Posted November 20, 2005 what size are the Nitto drag radials? Does that mean the CRD Supra is no more or is it being built bigger and stronger for next year? JB Link to comment Share on other sites More sharing options...
slowboy Posted November 20, 2005 Author Share Posted November 20, 2005 I will have to check, I have two sets of rears they are both 17" but I am not sure on the width, I will check on monday and mail you back, but no it is not the end of the car just getting bigger and better for next year. Link to comment Share on other sites More sharing options...
darren j adams Posted November 20, 2005 Share Posted November 20, 2005 how much for the cage? D. Link to comment Share on other sites More sharing options...
slowboy Posted November 20, 2005 Author Share Posted November 20, 2005 I would need £500 for the cage, it is a very nice bit of kit. Link to comment Share on other sites More sharing options...
darren j adams Posted November 20, 2005 Share Posted November 20, 2005 Any pics D. Link to comment Share on other sites More sharing options...
slowboy Posted November 20, 2005 Author Share Posted November 20, 2005 The cage is out the car I can take some pics tomorrow, it is a 6 point one with bolt in feet. Link to comment Share on other sites More sharing options...
darren j adams Posted November 20, 2005 Share Posted November 20, 2005 do you have to make holes or it uses original holes? pics anytime you can. thanks D. Link to comment Share on other sites More sharing options...
GeordieSteve Posted November 20, 2005 Share Posted November 20, 2005 Interested in the ECU. It is gold or silver? Link to comment Share on other sites More sharing options...
slowboy Posted November 20, 2005 Author Share Posted November 20, 2005 do you have to make holes or it uses original holes? pics anytime you can. thanks D. The car does not have any hole for a cage, so you have to drill the shell where the fittings go, so you will have 6 feet with 4 holes in each of them. Dee Link to comment Share on other sites More sharing options...
slowboy Posted November 20, 2005 Author Share Posted November 20, 2005 Interested in the ECU. It is gold or silver? Hi steve I have 2 f-cons, one in gold and an older one in silver, the gold one is pretty new and came out a 94 tt 6 speed mapped to run standard turbos, standard injectors with a front mount and 1.1 bar, it is fully mappible as well. send me a e mail and I will send you a pic of it. [email protected] Dee Link to comment Share on other sites More sharing options...
Recommended Posts