scooby_doo_do Posted May 14, 2003 Share Posted May 14, 2003 My Apexi boost controller seems to be giving off strange readings.... When i accelerate to what i see as 1.3 bar on the analogue gauge, it only reads a maximum as 0.67 on the digital boost controller, I've tried putting the boost up and down on the controller but it doesn't change the readings although i do get an increase in boost. would this be due to a bad earth or something ? Or is my boost controller faulty ? I'm only guessing that my analouge gauge is reading correctly at the moment ! Thanks.. Craig. Link to comment Share on other sites More sharing options...
Dragonball Posted May 14, 2003 Share Posted May 14, 2003 Could I suggest that your connection to the boost line (wherever you have put your 't' junction) may be leaking? Just a thought - probably a crap one - but a thought none-the-less! Link to comment Share on other sites More sharing options...
scooby_doo_do Posted May 14, 2003 Author Share Posted May 14, 2003 The analougue one works fine, but the digital one doesn't.... But i don't know how the digital one gets its information ? C. Link to comment Share on other sites More sharing options...
JamesG Posted May 14, 2003 Share Posted May 14, 2003 The digital boost controller gets its boost pressure reading from the same place as the analogue boost gauge. If it's not too fiddly, could you swap round the pipes? You'd be able to see if the analogue gauge starts reading low instead. James. Link to comment Share on other sites More sharing options...
Gaz Walker Posted May 14, 2003 Share Posted May 14, 2003 Ah yeah, what you've got there is an FBB'd Boost Controller... Very technical term before you ask... Gaz. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now