stevie_b Posted February 14, 2019 Share Posted February 14, 2019 I'm trying to remove the cushions from a driver's seat. The bottom cushion is held onto the frame with 4 bolts, one at each corner. The seat is out of the car and the plastic trim is off, but one of the rear corner bolts is extremely hard to get to. The metal frame makes it hard/impossible to get a spanner on it. Anyone got any tips on how to get it off? Link to comment Share on other sites More sharing options...
Hissig Posted February 14, 2019 Share Posted February 14, 2019 hmm. i did this last year, but cant remember that being an issue.. Have you read this thread? https://www.supraforums.com/forum/showthread.php?746194-DIY-HOW-TO-Seat-Cover-Install Link to comment Share on other sites More sharing options...
stevie_b Posted February 15, 2019 Author Share Posted February 15, 2019 Thank you! I'd got the seat height raised up. By refitting the wheel and lowering it, I could get access to the bolts. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now