Aiden93 Posted July 2, 2018 Share Posted July 2, 2018 Hi everyone, I’m trying to order some wheel spacers and and I’m a little confused on some of the information I’m required to give. As you can tell wheels, PCD etc aren’t my strong point , the only info I can find out is: Center bore: 60.1mm Thread size: M12 x 1.5 PCD: 5x114.3 Aside from that I have no idea about the other info needed. The wheels I have at the moment are Ultralite Nurburgring 18”. Any info is greatly appreciated Quote Link to comment Share on other sites More sharing options...
ripped_fear Posted July 2, 2018 Share Posted July 2, 2018 Im confused you have all the info you need above? what size spacers you after? I have a set in the garage Quote Link to comment Share on other sites More sharing options...
sunny Posted July 2, 2018 Share Posted July 2, 2018 From (hub pcd) and to (wheel pcd) should be the same (5x114.3) unless you're trying to put wheels with a different pcd on. - Centre bore is 60.1mm - stud or bolts option should be studs as the supra hub takes studs rather than bolts. - threadpitch is correct what u have M12 x 1.5 as far as i am aware pretty much the same for the wheels side of things too. Quote Link to comment Share on other sites More sharing options...
Aiden93 Posted July 2, 2018 Author Share Posted July 2, 2018 Im confused you have all the info you need above? what size spacers you after? I have a set in the garage Well I’m after some 50mm spacers for the rear as I’m having some Ridox rear arches fitted in a few weeks, have talked to a few people and since I won’t be tracking the car hub centric spacers should be fine. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.