bobapple Posted July 8, 2017 Share Posted July 8, 2017 Hi need help feel like am being thick here but am struggling to get the retaining strips of the front bumper in the top part of the mouth they are a plastic screw and washer but the screw turns and for the life of me can't just pull it out and help advice on this please would be greatly appreciated. Quote Link to comment Share on other sites More sharing options...
brom86 Posted July 8, 2017 Share Posted July 8, 2017 Have u tried a flat head screw driver between the strip and washer, applying pressure there may bring the screw out as you undo them Quote Link to comment Share on other sites More sharing options...
bobapple Posted July 8, 2017 Author Share Posted July 8, 2017 Hi mate yea tried that but it still just turned annoyingly Quote Link to comment Share on other sites More sharing options...
CorruptSapphire Posted July 8, 2017 Share Posted July 8, 2017 Are these the ones that you have to quarter turn then lift the washer away and the screw will come with it? Quote Link to comment Share on other sites More sharing options...
bobapple Posted July 8, 2017 Author Share Posted July 8, 2017 I don't think so not 100% sure though Quote Link to comment Share on other sites More sharing options...
bobapple Posted July 8, 2017 Author Share Posted July 8, 2017 Managed to get one off which hadn't been fitted fully it's the ones where the plastic washer is like a Wall plug and when you tighten the screw it spreads open tried to send pic but it won't let me upload one for some odd reason Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.