psymon Posted September 22, 2005 Share Posted September 22, 2005 I am trying to remove the rear vent skirt bit in fornt of the rear wheel. I have removed the 3 bolts from underneath and the two popper in the wheel arch. But it is still held on along the top seam. Don;t want to just pull it off incase I still have something to undo. Anyone Link to comment Share on other sites More sharing options...
Jake Posted September 22, 2005 Share Posted September 22, 2005 You can just pull it off now. There's four push fit locating spike things that are holding it on now. Link to comment Share on other sites More sharing options...
psymon Posted September 22, 2005 Author Share Posted September 22, 2005 Ok.. Found that mine have to bolts at the top that go through inside the car.. Had to take out the rear seat and the side tirms to access them.. What a bugger...... Done now, just got to put my trim and seat back in.... cheers Link to comment Share on other sites More sharing options...
Pete Posted September 22, 2005 Share Posted September 22, 2005 Ok.. Found that mine have to bolts at the top that go through inside the car.. Had to take out the rear seat and the side tirms to access them.. What a bugger...... Done now, just got to put my trim and seat back in.... cheers What a complete bugger! On standard OEM vent covers? Must be aftermarket. There's some funny (dodgy) ways of fixing this after market stuff. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now