Non turbo injector plugs mixed up?

[phil.g.]

Hi all,

I've been tidying up my wiring loom with black insulation tape as it was very tatty,

but I have now forgot which plugs go on which injector, it's a mkiv non turbo with the Y inlet that goes over the top of the engine, and the plugs are brown and grey,

 

Can any one please let me know what the colour of the wires going to each injector plugs are?

 

Thank you for any advise,

Phil.

[zelliott]

Don't know if thats any help to you ?

 

[phil.g.]

Thanks, I'll check when I get to the lockup,

I'm pretty sure I know the 2 plugs at the back of the engine go on 5 and 6 injector as they are too short for anywhere else, just not sure which one goes on which injector, grey or brown?

[SupraLEDrears]

Whilst it's still off, remove the insulation tape and get some of this instead. https://www.amazon.co.uk/Tesa-19mm-Adhesive-Wiring-Harness/dp/B00EVSL9X4/ref=pd_sim_107_1?_encoding=UTF8&psc=1&refRID=J33PDGFVM80Z8D2FN8M3

[phil.g.]

Hey that looks real good, I've just ordered it, thanks very much for the link

[SupraLEDrears]

No problem mate, my mechanic swears by it.

[phil.g.]

Managed to get to the lockup today, and it turns out I had all of the plugs on the wrong injectors,

1 and 2 had 4 and 3 plugs on

2 and 3 had 2 and 1 plugs on

5 and 6 were the wrong way round,

Big thanks to ZELLIOT for the pic that sorted it out

And thanks for the link to the loom tape harrypm82

Phil.

[SupraLEDrears]

Managed to get to the lockup today, and it turns out I had all of the plugs on the wrong injectors,

1 and 2 had 4 and 3 plugs on

2 and 3 had 2 and 1 plugs on

5 and 6 were the wrong way round,

Big thanks to ZELLIOT for the pic that sorted it out ��

And thanks for the link to the loom tape harrypm82 ��

Phil.

 

Always welcome