adi2009 Posted September 18, 2005 Share Posted September 18, 2005 Just yesterday i fixed my idling issue, I figured out that the idling issue was due to a fault in the Idle Air control valve connection. But now my car sounds very lumpy and the performance is also poor. Anyways, now yesterday while we were swapping the ECU (to make sure the idling issue was not due to an ECU malfunction) we found that the RED/Yellow wire in the loom near the ECU was cut, so we connected that line back and started the car and it sounded real lumpy. I later found out that the RED/Yellow wire is the one going to the 2nd Injector from the ECU. I really have no clue what could have gone wrong??? The engine now sounds lumpy like a V8. Any help would be great. Oh and i did an error code check and nothing came up. Cheers Link to comment Share on other sites More sharing options...
adi2009 Posted September 19, 2005 Author Share Posted September 19, 2005 Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now