Tariqd Posted June 15, 2016 Share Posted June 15, 2016 Hi guys, I'm having problems with my windscreen front and rear washers not working. I am assuming the stalk push or pull is the wash function and for rear it is the spin on the left stalk. However when I do either of these absolutely nothing happens. I cannot even hear it trying to do anything so I doubt it would be the pump itself. I am assuming it could be a fuse? Where can I find the fuse in the j-spec which could potentially be the culprit? Does anyone have any other suggestion? Many thanks Link to comment Share on other sites More sharing options...
Scooter Posted June 15, 2016 Share Posted June 15, 2016 Button on the end of the stalk? for rear twist all the way round? Link to comment Share on other sites More sharing options...
Fitz Posted June 15, 2016 Share Posted June 15, 2016 Button on the end of the stalk? for rear twist all the way round? As above there is a button on the end of the wiper stalk that controls the front washers. Link to comment Share on other sites More sharing options...
peter richards Posted June 15, 2016 Share Posted June 15, 2016 mine were blocked down in the tubes , so if you hear the pump working when you press the button on the end , pull the tubes off and get them blown out and they should work Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now