Vibration - bodywork - ? ? ?

[herbiemercman]

Hi Guys, I thought i was home and dry with my post NA/T conversion, but not just yet, all be it i am fairly sure the current problem is not related to this.

 

As many of you are aware i changed the clutch from a stage 4 to a stage 2, which is great, however since this was carried out by my local garage, who are very capable and skilled etc, i have been experiencing a very loud vibration on the bodywork, like some thing on the gearbox or engine or exhaust is 75% of the time touching the bodywork, i can even feel the vibration in the foot pedals and all the dash etc is sort of vibrating, it's a sort of high frequency droan.

Have any of you had an experience like this? also what parts of the flywheel housing and gearbox, including the gear change assembly could cause this situation?

Everything on the engine, like boost pipes, baffles, exhaust system, etc has been eliminated.

 

Any help will be much appreciated as this is a bad problem. Herbie.

Edited December 5, 2015 by herbiemercman (see edit history)

[herbiemercman]

I decided to take another look at the down pipe and removed all the baffles etc, i discovered that the waste gate dump pipe clamp was lose and had allowed the pipe to foul the chassis, readjusted this and all ok, well pleased and it has saved me a visit to my local garage. Herbie.