LOGIE Posted July 29, 2015 Share Posted July 29, 2015 Does anyone know where I can get straight up non return valve for a 044 bosch? Mine is the 45° bent one. (Pictured) Cheers Link to comment Share on other sites More sharing options...
LOGIE Posted July 29, 2015 Author Share Posted July 29, 2015 Heading should read NON return valve but I cant edit it. Link to comment Share on other sites More sharing options...
Chris Wilson Posted July 29, 2015 Share Posted July 29, 2015 Demon Tweaks, bag tank makers, loads of places, maybe Faye at Speedflow. It's just a hydraulic / fuel fitting, nothing to do with the none return valve. Link to comment Share on other sites More sharing options...
LOGIE Posted July 30, 2015 Author Share Posted July 30, 2015 Demon Tweaks, bag tank makers, loads of places, maybe Faye at Speedflow. It's just a hydraulic / fuel fitting, nothing to do with the none return valve. Ah right cheers Chris. So does the pump have a non return valve? Link to comment Share on other sites More sharing options...
Chris Wilson Posted July 30, 2015 Share Posted July 30, 2015 Yes it's the part sat on the copper washer in the photo, with the 90 degree fitting clamped to it with the banjo bolt. Link to comment Share on other sites More sharing options...
LOGIE Posted August 1, 2015 Author Share Posted August 1, 2015 Cheers. Don't suppose you know the size (thread) of the straight up fuel fitting? Link to comment Share on other sites More sharing options...
Chris Wilson Posted August 1, 2015 Share Posted August 1, 2015 M12 X 1.5 mm from memory. Ask Faye at Speedflow UK for one, she has them in stock as a rule. Then you need to go from that -6 fitting to a bvarb or whatever you need. Although I never use push on Link to comment Share on other sites More sharing options...
LOGIE Posted August 2, 2015 Author Share Posted August 2, 2015 M12 X 1.5 mm from memory. Ask Faye at Speedflow UK for one, she has them in stock as a rule. Then you need to go from that -6 fitting to a bvarb or whatever you need. Although I never use push on Great info thanks Chris Link to comment Share on other sites More sharing options...
little num Posted August 2, 2015 Share Posted August 2, 2015 you still need this, I have a straight that goes to an8 I can take a picture if needed. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now