gordy.r Posted June 19, 2015 Share Posted June 19, 2015 I'm looking at getting one of these for two reasons: 1) The build quality and flow rate 2) I don't like the sound of the HKS SSV To that end, does anyone have any experience with these? Is it a direct replacement for the OEM BOV or will it need to be welded in to my FMIC pipe work? I've seen they sell various spring rates as well, I've emailed the company to see which would be best for my BPU TT and I'm guessing it will be 11, but I'll hopefully know more when / if they get back to me. Link to comment Share on other sites More sharing options...
gordy.r Posted June 20, 2015 Author Share Posted June 20, 2015 Bump, anyone? Link to comment Share on other sites More sharing options...
Brazil Posted June 20, 2015 Share Posted June 20, 2015 I have it on my car but not got to properly run it in before my crank walk and bottom end failure; its not very loud but on my case maybe its because it was only running 1 bar and i never got to really drive hard since i was running in miles. Link to comment Share on other sites More sharing options...
makri Posted June 20, 2015 Share Posted June 20, 2015 (edited) I had this BOV on my 67mm single, the quality was very good, no leaks. It came with a alu weld in v-band flange. The v-band made it easy to install once the flange was welded to the IC piping Edited June 20, 2015 by makri (see edit history) Link to comment Share on other sites More sharing options...
gordy.r Posted June 21, 2015 Author Share Posted June 21, 2015 Thanks for the feedback guys, yeah the build quality seems to be really good on these and that's what is drawing me towards them. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now